HappyModel BNF Crux3 3" Quad - Choose Your RX

$94.99
Coming Soon
In Stock
Pre Order
Receiver
Free Delivery on U.S.A. Orders $50 or more
Add to Wishlist

The DSMX version is not currently not compatible with Spektrum DXE and DX6E radio transmitter. HappyModel is working on fixing this with the next release of BetaFlight.

A zippy 3" toothpick BNF, perfect for any size outdoor space. Includes a TPU mount for your insta360 go and operates on a variety of 2S Lipo batteries

Check out the HappyModel Crux3 Quad and Accessories Collection.

Be sure to check out all our pre-built quads, and all our Happymodel products

Specifications

  • Wheelbase: 115mm
  • Size: 97x97x35mm (without propellers)
  • Weight: 41g (without battery)
  • Recommend Lipo Battery: 2s 350mah/400mah/450mah/520mah Battery ( NOT Included)

EX1202.5 6400KV Motor

  • Configuration :9N12P
  • Stator Diamter: 12mm
  • Stator Length: 2.5mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimension(Dia.*Len): Φ14*14.5mm
  • Weight: 4.4g
  • No.of Cells(Lipo): 1-2S

Gemfan 3018 2-Blade Propeller

  • Center Thickness: 5.5mm
  • Prop Diameter: 76.5mm
  • Center Hole diameter: 1.5mm

CrazybeeX FR V2.2 F4 Flight Controller

  • MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU6000 (SPI connection)
  • Board Size: 28.5x28.5mm
  • Power Supply: 1-2S battery input (DC 2.9V-8.7V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G VTX
  • Built-in SPI Frsky/Flysky receiver or no receiver
  • Built-in 5V 1A BEC
  • (Frsky SPI RX Version) CRAZYBEEX FR V2.2 FC Firmware target: CrazybeeF4FR
  • (Flysky SPI RX Version) CRAZYBEEX FS V2.2 FC Firmware target: CrazybeeF4FS
  • (DSM2/X SPI RX Version)CRAZYBEEX DXS V1.0 FC firmware target: CrazybeeF4DXS
  • (External Frsky RXSR Version) CRAZYBEEX PNP V2.2 Firmware target: CrazybeeF4DX
  • (External TBS CRSF NANO Version) CRAZYBEEX PNP V2.2 Firmware target: CrazybeeF4DX
  • Onboard 5A BL_S 4in1 ESC
  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HV
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: S_H_50_REV16_7.HEX
  • Default protocol: DSHOT600
Onboard Frsky SPI D8 Receiver Version (Optional)
  • SPI BUS receiver Frsky D8 compatible
  • Compatible Non EU transmitter D8 model
  • Channels: 8ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

 

Onboard Flysky SPI receiver Version (Optional)

  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m
  • Failsafe support

Onboard DSM2/X SPI receiver Version (Optional)

  • SPI BUS receiver DSM2/DSMX compatible
  • Channels: Max 12ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
  • RSSI enable (show on the goggles)

External Frsky R-XSR receiver version (Optional)

  • Weight: 1.5g
  • Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
  • Operating Voltage Range: 3.5V~10V
  • Operating Current:70mA@5V
  • Firmware Upgradable
  • Compatibility: FrSky X Series modules and radios in D16 mode
  • Could support Frsky New ACCESS Protocol ( Upgrade firmware)

External TBS CRSF Nano receiver version (Optional)

  • Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible
Onboard 5.8G 40CH 25/200mW VTX
  • Output power: 25mw~200mw switchable
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 40 channels
  • With Race band
  • Smartaudio ready
Caddx ANT 1200TVL Camera
  • Image Sensor: 1/3" CMOS Sensor
  • Horizontal Resolution: 1200 TVL
  • TV System: NTSC or PAL Switchable
  • IMAGE: 4:3
  • Synchronization: Internal
  • Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
  • S/N Ratio : >52dB (AGC OFF)
  • Video Output: CVBS
  • Lens: 1.8mm
  • Min. Illumination: 0.001Lux@F1.2
  • Auto Gain Control: YES
  • BLC: YES
  • WDR: Global WDR
  • DNR: 3D DNR
  • Dimensions: 14*14mm(with bracket to 19*19mm)
  • Wide Power Input: DC 3.7-18V
  • Work Temperature: -20℃~+60℃
  • Weight: 2g 

Includes

  • 1x HappyModel BNF Crux3 3" Quad - Choose Your RX
x