iFlight BNF Chimera7 HD 7" Quad w/ DJI Air Unit - Choose Your Version and RX

$499.99
Coming Soon
In Stock
Pre Order
Receiver
Version
Free Delivery on U.S.A. Orders $50 or more
Add to Wishlist

 A DJI Air unit equipped 7" long range BNF from iFlight, complete with GPS.

The Long Range Version has 1300Kv Motors and the Freestyle has 1800Kv Motors.

Check out our DJI compatible quads and accessories, and all our iFlight gear!

Features

  • 6mm rigid arm design for more stiffness
  • Top- and bottom battery mount option
  • XING 2806.5 efficient wide stator motors
  • GPS pre-installed for more safety at distance
  • TPU Bottom Stand for Gopro Camera (Camera and Camera Mount are NOT included)
  • 360° TPU protection, DJI cam protection and antenna mounts
  • DJI FPV Air Unit, buttery-smooth 720p120fps FPV feed (TPU soft mounted)
  • No props in view (DJI Air unit record in 1080p/60fps)
  • Battery voltage LED status light (illuminated IF logo on the bottom)

Specifications

  • Wheelbase: 320mm
  • Weight: 628.1 ( without Battery)

Chimera7 Frame

  • Wheelbase: 320mm
  • Main body dimension: 285*199mm
  • Bottom to top distance: 20mm
  • Arm thickness: 6mm
  • Bottom plate thickness: 3mm
  • Top plate thickness: 2mm
  • Upper(middle) plate thickness: 3mm
  • Camera plate thickness: 3mm (included TPU inserts)

SucceX-D F7 V2.1 TwinG Flight Controller

  • MCU: 216MHz STM32F722
  • Gyroscope: 2x ICM20689
  • Barometer: YES
  • Blackbox: 32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale: 100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad: Yes
  • RSSI input pad: No
  • UARTs: 5
  • Motor outputs: 8
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry:RX5
  • Input voltage: recommended 2-6S, MAX 8S
  • Firmware Target: IFLIGHT_F722_TWING
  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • Dimensions: 36x36mm
  • Weight: 7.5g
  • USB type-C

SucceX 50A BLHeli_32 4in1 ESC 

  • MCU: STM32F051
  • Up tp 48kHz PWM frequency
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 50A / Burst: 60A
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to Dshot1200, Proshot, Oneshot, Multishot
  • Target: iFlight-BL32-4IN1
  • Weight: 14.4g
  • Size: 43x39mm (including the power pads)
  • Mounting Hole: 30.5x30.5mm/Φ3mm

XING 2806.5 1300KV Motor (Long Range)

  • Voltage: 2-6S
  • KV: 1300KV
  • Configuration: 12N14P
  • Bearing: NMB 11*5*5
  • Stator Diameter: 28
  • Stator Length: 6.5mm
  • Shaft Diameter: M5
  • No.of Cells(Lipo): 2-6S
  • Weight: 49.5g(with a short cable)
  • Motor mount hole: 19x19 φ3mm

XING 2806.5 1800KV Motor (Freestyle)

  • Voltage: 2-6S
  • KV: 1800KV
  • Configuration: 12N14P
  • Bearing: NMB 11*5*5
  • Stator Diameter: 28
  • Stator Length: 6.5mm
  • Shaft Diameter: M5
  • No.of Cells(Lipo): 2-6S
  • Weight: 49.5g(with a short cable)
  • Motor mount hole: 19x19 φ3mm

DJI Air Unit HD Digital System & Camera

  • Weight : Air Unit (Camera included): 45.8 g / 3.9 g (MMCX elbow each)
  • Dimensions
  • Air Unit: 44 x 37.8 x 14.4 mm
  • Camera: 27.4 x 21.1 x 20.1 mm
  • Coaxial Cable: 100 mm

 Includes

  • 1x iFlight BNF Chimera7 HD 7" Quad w/ DJI Air Unit - Choose Your Version and RX
x