iFlight BNF Nazgul5 V2 5" Quad w/ iFlight Racecam Micro - Choose Your Version

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $60 or more
Add to Wishlist

The Frsky receivers comes pre-loaded with ACCESS firmware, Non-FrSky Radios and FrSky radios with ACCST will be rendered unable to bind. Please flash your RX with the legacy firmware to remedy this issue.

The Nazgul5 V2 is a high performance 5" bind and fly quadcopter built on the updated XL5 V5 frame. Now featuring the iFlight Racecam Micro and a SucceX-E F7 flight stack that's pre-tuned and ready to rip. Just bind your transmitter and fly! Loads of power and smooth flights are guaranteed using the new XING-E PRO unibell motors with long lasting NSK bearings. 

4S version comes equipped with 2750Kv motors and 6S with 1800Kv

Check out our DJI compatible quads and accessories, and all our iFlight gear!


  • 5mm arm design for more durability
  • Easy-Swap arms
  • LED illuminated Logo
  • XING-E PRO 2207 (4S 2750Kv / 6S 1800Kv)
  • iFlight Racecam Micro
  • 25-800mW VTX
  • 5" version also fits 5.1" style propellers
  • Popular True-X configuration
  • TPU crash-guards
  • Fits both 30.5x and 20x stacks
  • F7 Flight controller
  • 45A ESC


  • SucceX-E F7 45A flight stack
  • XING-E PRO 2207 (6S 1800kv / 4S 2750kv)
  • Wheelbase: 240mm*240mm 
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)
SucceX-E F7 Flight controller
  • MCU: STM32F22RET6 (216MHz)
  • Gyro:MPU6000
  • Baro: DSP310
  • Blackbox:16MB
  • UARTS: 4 (1 2 4 5)
    • UART1 - VTX HD(Vista or Air Unit) or Analog Telemetry

    • UART2 - Receiver

    • UART4 - Free 

    • UART5 - ESC Telemetry

  • Dshot/PWM outputs: 4
  • WS2812 led Strip:YES
  • Beeper:YES
  • Input Voltage:2-6S
  • BEC: 5V/2.5A 
  • Firmware: IFLIGHT_SUCCEX_E_F7
  • Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
  • Dimensions:36*36mm
  • Weight:6.9g

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • Supports 2-6S Lipo input
  • STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
  • Current sensor: YES
  • BEC: NO
  • Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
  • Target: G-H-30 BLS 16.7
  • Dimension: 40*43mm
  • Mounting Holes: 30.5*30.5mm/Φ3mm
  • Weight: 14.4g

SucceX-Force 800mW adjustable VTX

  • Full format video format: NTSC /PAL
  • Input voltage: 7V~36V,+12V/380mA@800mW;
  • Channels: 48
  • Power Output: PIT/25mW/200mW/400mW/800mW
  • Output voltage/ Max current: 5V 1A
  • Weight: 7.2g


  • 1x iFlight BNF Nazgul5 V2 5" Quad w/ iFlight Racecam Micro

SucceX-Force 800mW VTX Table

iFlight Wiring Diagram and CLI Dump