PLEASE READ BELOW SAFETY REMINDER. DO NOT FRY YOUR AIR UNIT!!

The Vista plug & play port has no voltage regulator (BEC) and is passing through VBAT.

The Caddx Vista goes up to 26.4V (6S), the DJI Air Unit goes up to 17.6V (4S). Make sure not to plug-in your DJI Air Unit directly when you're flying 6S, because this would fry it! MUST ADD BEC for your 6S build.

The SucceX-E Mini F4 Stack by iFlight pairs the SucceX Mini F7 Flight Controller along with the SucceX-E Mini 35A 4-in-1 ESC, handling up to 6S input voltage to push your FPV racer to the max. With 4 UARTS and Caddx Vista plug and play ready, this stack will cover your bases for racing, freestyle, and long range.

Check out all our 20x20 stacks and all out  iFlight gear selection!

Features

iFlight SucceX-E V1.1 F7 Flight Controller

• Gold-plated plug
• BlackBox: 8MB
• Vista HD Plug-and-Play. No need to solder tiny wires.
• BAT, +5V, 3.3, Start indicator
• Smartaudio & IRC Tramp VTX protocol supported

SucceX-E 35A Mini 2-6S BLHeli_S 4-in-1 ESC

• 6 layers double-sided PCB board
• 2oz 1.4mm thick power board
• TDK MLCC Low ESR ceramic capacitors
• Top grade 2R203 MOSFET

Specifications

iFlight SucceX-E V1.1 F7 Flight Controller

• MCU: STM32F22RET6 216 MHz
• Gyro: MPU6000
• Baro: BMP280(I2C）
• OSD: IFLIGHT OSD （AT7456E）
• BEC: 5V 2.5A
• BlackBox: 8MB
• Uart: 4*UART(UART1、UART2、UART4、UART5)
• UART1 for VTX HD/Analog Telemetry
• UART2 for Receiver
• UART4 for GPS 
• UART5 for ESC Telemetry
• 4×Dshot/PWM outputs
• Smartaudio & IRC Tramp VTX protocol supported
• WS2812 led Strip: Yes
• Beeper: Yes
• Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
• Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
• Weight: 6.9g

Physical

• Mounting hole: 20*20mm，φ3mm
• Size: 27*27mm

ESC // SucceX-E 35A Mini 2-6S BLHeli_S 4-in-1 ESC

• MCU: BB21 F16G
• BLHeliS
• Capacitance: 470uF/50V
• Current Sensor: Yes
• Input: 2-6S LIPO
• Constant: 35A / Burst: 40A
• BEC: No
• Supports up to Dshot600, Proshot, Oneshot, Multishot
• Target: G-H-30
• Weight: 6.9g
• Mounting pattern: 20*20, φ3mm with Grommets φ2mm
• Dimensions: 31*30mm (including the power pads)

Includes

• 1x iFlight SucceX-E Mini F7 2-6S 20x20 Stack/Combo for Caddx Vista (F7 HD FC, 35A 4in1 ESC)