FPV Drone Flight Controller Accessories

The Flywoo GOKU GM10 Nano V3 Micro GPS with Compass (10th Gen) is the perfect choice for reliable navigation. This GPS weighs in at just 2.8g, and ...

Experience a reliable and lightweight GPS system with the Flywoo GOKU GM10 Mini V3 GPS with Compass. This system provides accurate guidan...

The Matek SAM-M10Q-5883 GNSS is a cutting-edge multi-constellation GNSS module featuring the advanced u-blox SAM-M10Q platform. It offers exception...

Holybro M9N Micro GPS w/ IST8310 Compass is the perfect navigation solution for professionals looking for maximum precision. This 10th gen GNSS mod...

Compact GPS Module from HGLRC. The HGLRC M80 PRO GPS Module comes with a QMC5883 chip to help identify the location of your drone quickly. Receives...

The RUSH BLADE Power Filter Board by RUSHFPV was created to help the RUSH BLADES ESCs achieve complete filtering due to its compact structure and h...

Tiny module with compass and barometer from Flywoo! If your FC board has a barometer, you need to disconnect the Baro SDA / SCL pad. Check out all ...

A smoke stopper can help avoid damage when you power on a mini quad drone for the first time. Sometimes you might have a defective part or a short ...

Light up your quad with TinysLEDs Micro RaceliteWire V2 2-4S. This one-piece PCB will snap into four pieces. You will have to solder motor wires fr...

Some drones like DJI models are installed with GPS that only provide you the craft location, with the sound help, you can find your lost drone prec...

The CLRacing 32 Programmable RGB LED Strip will make your quad light up the sky with their 32 ultra-bright RGB LEDs! Check out all our LEDs and all...

Stop wondering how fast your RC car can run and how high your RC Airplane or helicopter can fly. Now all these data come at your finger with the GP...

Easy to use, nicer looking, and perfect for protecting wires. Choose the right size for your build!Check out our hardware selection, all our pigta...

Replacement XT30 pigtail with capacitor for the Sailfly-X & Mobula7 HD, or anything using an XT30! Check out the rest of our parts and accessor...

Clean up your video with this premium capacitor! Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all...

 Toward the Sky! With this mini GPS module from RUSHFPV. Small enough to fit on almost any drone, but with updated engines & more power! Check ...

We're excited to announce a brand new FPV drone frame.  This is a smaller frame 5" and is great for many different applications. SPECIFICATIONS St...

Clean up your video during those high throttle punch outs with this high quality capacitor from Japan.  Check out all our Low-ESR capacitors specif...

Precision TBS branded GPS / Glonass module for Betaflight or Pixhawk. Specifications Chipset - ublox UBX-M8030 Flash memory for saving configurati...

This set of 4 M3 silicone rubber vibration dampeners gummies work great to help reduce flight controller vibrations on your quad. Includes 5 anti-...

Pair of Matek WS2812 RGB LED Strips. Check out all our LEDs  as well as the entire Matek selection! Specifications Voltage: 5V Size: 57x8mm Inclu...

Protect your electronic components further with this elastic Gemfan stack protector.It's double sided... choose which design you like the best! Che...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

Compact GPS Module from HGLRC. Check out our GPS selection and all our HGLRC products! Specifications Chip: M8030 Power Supply: 5V Antenna: Ceram...

The latest Micro BEC from Matek. These thins are tiny! Great for adding powering your 5 or 9V accessories without adding any meaningful weight to y...

Same as the tiny ones, but a little more thin to fit on Catalyst frames.  Check out all our LEDs, and all our TinysLEDs products! Size: 6mmx30mmx...

HGLRC brings you a brand new and upgraded HGLRC LED Mini -（38mm). The HGLRC LED Mini (38mm) light bar can be connected directly, which is more conv...

Toward the Sky! With an even smaller GPS module from RUSHFPV! Small enough to fit on almost any drone, but with updated engines & more power! C...

TuneRC Buzzer is an alarm system to help you locate your lost drone. This buzzer has a driver circuit built in, so you can connect it to any flight...

Same as the little ones, just twice as many LEDs.  Check out all our LEDs and all our TinysLEDs! Specifications Voltage: 3-6s / 12-26 Volt. Size: ...

These are the Super bright LEDs from our friends at TINYSLEDs.  Grab the larger version here Check out all our LEDs and all our TinysLEDs! Specific...

Check out the FETtec OSD Board which gives you on-screen display of important data, as well as full-tuning of KISS parameters. This board is suitab...

Clean up your video during those high throttle punch outs with this high quality Rubycon Capacitor from Japan. Check out all our Low-ESR capacitors...

May have new updated design next batch starting March 2024 Protect your electronic components further with this elastic Gemfan stack protector.It's...

Clean up your video during those high throttle punch outs with this high quality capacitor from Japan. Check out all our Low-ESR capacitors or all ...

Customize your quadcopter with Flywoo's 4x10x1mm racewire LED Board! Choose from five colors - white, red, green, blue, and pink - and e...

It can be used on traditional PWM receivers or FPV racing flight controller. The tiny buzzer is drived by on board MCU. It can output louder sound ...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

For those hard-to-reach DJI Air unit and Caddx Vista USB-C port connections, this is a great little adapter! Also works with flight controllers tha...

Designed for the Flywoo Chasers \ Vampire-2, but can be used anywhere a micro USB is needed! Easily access limited spaces with a set of two 90° Mic...

A great way to reduce the amount of unwanted noise that makes it to your gyro. When used properly, this is a simple way to make your quad fly bette...

The new filtering solution for FPV hobby, it has the perfect filtering effort on high-frequency interference generated by ESC. Protect your expensi...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

A set of custom-designed and printed, ultra-soft TPE grommets to fit both your whoop AIO and your VTX in a most compact way (8.5mm tall) Fits HDZer...

This is a M2 size grommet for savagebee or mosquito frame. Include: 1 x M2 Grommet (set of 5)

Can be used with any 8 pin stacks, just make sure to re-pin when necessary! Specifications Length: 72mm end to end Includes 1x Airbot 4in1 ESC t...

  This COB LED Connecting Wire is a perfect choice for any sophisticated lighting installation. Crafted with AWG30 size and IP20 rating, it is stro...