Zeez F7 30x30 Flight Controller w/ Optional LEDs
High quality F7 flight controller designed in Italy by Zeez.
- Support up to 8S input with 5V @3A BEC (protected from over current, over temperature and short circuit) for power all peripherals. (such as CAM, VTX, LED, RX)
- Build with STM32F722 MCU for best performance, it support all most used firmware on the market, like Betaflight, EmuFlight and INAV.
- MPU6000 Gyroscope and accelerometer combined with soft mount will give you the best clear signal that will track your motion.
- Onboard 128MB flash to store all logs for days of flight.
- VTX switch to power ON/OFF your video transmitter directly from your radio (enable it using USER1 in the modes tab of the firmware) .
- OSD Chip with all correct capacitor and LC filter will give clear voltage to the camera and the VTX.
- Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation.
- USB type C connector and logic side current protection built in to save the FC from short.
- Up to 8S input
- BEC: 5V/3A
- MCU: STM32F722
- Supported Firmware: BetaFlight, EmuFlight, INav
- Gyro/ACC: MPU6000
- Onboard flash: 128MB
- OSD: Yes
- UARTS: 6
- VTX Power Switch: Yes
- LC Filter: 5V
- Connector: USB Type C
- Onboard RBG LED Controller: Yes
- Mounting holes: 30×30
- Dimensions: 41x41x8mm
- Weight: 7.5g
- 1x Zeez F7 30x30 Flight Controller
- 4x Zeez LED Strip w/ Plugs (Optional)