Full Size Flight Controllers (30x30)

The next generation of RDQ Bardwell Flight Controller is here! Packed with features including an F7 processor, ICM20602 Gyro, several DC power outp...

The latest and greatest AIO FC from Matek is here and bringing new features to the table that pushes forward our hobby to a new extent!  Check out ...

Packed with features, the H743-Slim from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot. Check out our 30x30 Flight Control...

The new F7 board from Matek is loaded with a 32K Gyro, Baro, BFOSD and SD card slot.  With the ribbon connector to the Matek FCHUB-VTX or FCHUB-6S,...

The Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates flight controller (FC) and on-screen display (OSD) in...

HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to ...

A great option for those running individual ESCs who want a full featured F7 Flight Controller. Check out all our 30x30 Flight Controllers and all ...

The Matek F722-Mini SE has been improved over the previous NON SE version and now has a BMP280 Barometer.  Check out the entire Matek selection! S...

The Radix 2 is the latest generation flight controller by BrainFPV. It is the successor of the legendary Radix flight controller and everything has...

The T-Motor F7 Flight Controller now comes in a version meant specifically for the DJI Digital FPV System! Including a plug for your Air Unit and a...

iNav and Betaflight compatible and packed with features, especially suited for long range builds. Check out all our 30x30 FCs as well as the entire...

A great flight controller that is plug and play compatible with DJI Check out all our 30x30 Flight Controllers and all our HGLRC gear!   Features ...

RUSH BLADE F722 30x30 Flight Controller For Analog by RUSHFPV. This FC features MPU6000, Onboard OSD, and beta flight firmware.  Check out all our ...

SpeedyBee has stuffed everything you could ask for into this 30x30 FC. It has Bluetooth, Wi-Fi, DJI Plug and Play, an F7 MCU, and more! Check out ...

RUSH BLADE F722 30x30 Flight Controller by RUSHFPV for your  DJI Digital FPV System. This FC features high-performance STM32 F722 MCU, MPU6000, and...

F4 Wing FC at a great price from Jhemcu! Check out all of our Wing Flight Controllers.  Features INAV Support Supports up to 2 motors and ...

The new F405 board from Matek is packed with a 32K Gyro, Baro, BFOSD, and SD card slot. Using the ribbon connector with the Matek FCHUB-VTX or FCH...

The incredible CLRacing F7 Flight controller, now available in an HD plug and play version! The 5V/VBatt pads will not work unless user1 mode range...

Foxeers's V2 F7 FC has a clean layout with some quality components. No more worrying about lifting pads during crashes, this FC has through holes f...

CLRacing gives you the option of a single MPU6000 gyro if you prefer it over their dual gyro version of the CLRacing F7 V2. The only difference bet...

The incredible CLRacing F7 Dual Flight controller, now available in an HD plug and play version! The 5V/VBatt pads will not work unless user1 mode ...

The CLRacing F7 Dual revision 2.2 has a notch cut out for tight builds or high camera tilt, as well as being able to power the CLRacing Bluetooth M...

T-Motor's first F7 Flight Controller has arrived! Logical layout, designed to work seamlessly with the T-Motor F45 and F55 ESC. Check out all our 3...

Packed with features, the F405-SE FC from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot. Check out our 30x30 Flight Control...

Quality components, plenty of features, and DJI plug and play ready. If you're looking for a versatile flight controller that will perform on just ...

T-Motor's latest F4 FC packed with 6 UARTS and equipped with an onboard LC filter.  Check out all our 30x30 Flight Controllers, and all our T-Motor...

GEP-F722-HD is a plug-and-play flight controller with F722 chip and a tower flight system with BLheli_32 50A 4 and 1 32-bit electrical modulation. ...

This flight controller has plenty of features that will suit the needs of almost any build. It has built-in Bluetooth and a 10V/3A BEC for DJI Air ...

The HIFION F7Pro V2 has all the bells and whistles. Equipped with DJI plug and play capabilities, 6 UARTs, and built-in Bluetooth.  Check out all o...

The Idea was to get the simple KISS FC to the next level and due to intensive long-term tests of some pretty good pilots, Flyduino optimized the ...

Cut down on the soldering and make sure you DJI Air Unit gets the right amount of voltage with this F722 Equipped DJI Plug-and-Play flight controll...

This is a replacement flight controller for the Diatone Mamba F405 DJI MK2 3-6S 30x30 Stack/Combo for DJI Check out our other great Diatone product...

With multiple UARTS and BECS, this flight controller can run all the peripherals you could ever want with ease. Check out all our 30x30 FCs and all...

The SucceX-D F7 V2.1 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugge...

Spare replacement flight controller for the iFlight SucceX-E stack. Check out all our 30x30 Flight Controllers and all out  iFlight gear selection!...

Connect this FC directly to the SpeedyBee App via WiFi. No more cords or hauling your laptop out in the field to get your tune dialed in! Check ou...

The FETtec KISS F7 FC is finally here! Check out all our KISS compatible gear, and everything FETtec! Features Processor F7 [DShot 2400, Oneshot, ...

Holybro has what you need for your next HD build with individual ESCs!  Holybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx m...

The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot. The faster F4 processor gives...