iFlight BNF ProTek25 2.5" Cinewhoop - TBS
iFlight's all new 2.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here...
ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our popular XING 1404 motors in a higher kv class will give you all the power you need to get good speed, do some freestyle or carry a full GoPro through tiny gaps.
A lot of thought was put into the different assembly options. iFlight's stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).
Durable plastic protectors with copper standoffs, portable compact design, easy accessible UBS port without disassembly, LED battery status, lost model buzzer and a universal mount for Insta360 or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.
TBS version depicted in images.
Pre-Tuned & Pre-Setup
- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
- To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
- Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"
- No Props or frame in view!
- Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
- High-performance SucceX-D 20A Whoop F4 AIO Board to save weight and space
- T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
- Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
- Low Resonance frame construction (Less Jello, more Cinematic footage)
- Butter smooth XING 1404 5500KV motors
- Pre-tuned with smooth freestyle settings
- SucceX-D 20A Whoop AIO
- Motor: XING 1404 5500KV
- Wheelbase: 114mm
- Body Size: 91*68.7mm
- Bottom plate thickness: 3mm
- Top plate thickness: 2mm
- Top and bottom plate spacing: 24mm (aluminum standoff height)
- Propeller size: 2.5 inch
- FC pattern: 25.5*25.5mm / 20*20mmmm
- FPV cam spacing: 20mm
- Weight: 194.3g (without battery)
SucceX-D 20A F4 Whoop AIO Fligh Controller
- Mounting pattern：25.5*25.5mm/φ3mm
- BEC output：5V 2A/10V 2A
- INA pad：UART2 (nR2)
- Constant current：20A，25A（Burst）
- Current sensor：yes
- ESC Telemetry：no
- ESC Firmware：G-H-30 BLS
VTX// SucceX Micro Force 5.8GHz 300mW VTX Adjustable
- Power: PIT/25/100/200mW/300mW
- Antenna interface: IPEX (UFL)
- VTX protocol: IRC Tramp
- Size: 13.5x14.5mm
- Weight: 1.4g
- 1x iFlight BNF ProTek 25 2.5" Cinewhoop - TBS