CL Racing F4 Flight Controller AIO
A simple board which simply works! Just like RDQ, this CL_Racing F4 AIO FC has everything you need, and nothing you don't. With a simple board layout, the CL Racing Flight Controller is easy to setup, maintain, and understand. As a result, the board is robust, high performing, and cost effective. If you're looking for one of the most reliable F4 AIOs on the market, at the best price, then this is your next flight controller!
Specs & Features:
- LiPo Input: 2-6S
- 120A Current sensor with 160A PDB build in
- Size: 36x36mm
- Mount Holes: 30.5 x 30.5 mm
- CPU - STM32F405RGT6 (F4 chip)
- SD Card Slot
- Built-in 5V BEC 1.2A
- Built-in 7.6V BEC 1.2A Filtered For camera and VTX
- Built-in Betaflight OSD
- Built in current sensor, PDB
- 4 UARTS + USB
- 5V LED strip output (Don't use high power LED on 5V not exceed 500 ma)
- 4 motors on each corner for a better layout.
- Dedicated Sbus hardware inverted (F4 normally needs inverter for the signal), separated ppm and sat_rx input.
- Support TP and Smartaudio VTX
- Dshot ready for new ESC protocol
- Supports all Betaflight features
We Also Recommend
EMAX Magnum Stack - Tower System - AIO F4 Flight Controller, ESC, VTX, and RX