Diatone BNF Roma F1 1.6" Quad - FrSky

$179.99
In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $60 or more
Add to Wishlist

Roma F1 is a 40mm propeller size model with a family-style front face design of the ROMA series, with a magnesium-aluminum alloy head and an integrated bottom plate.

Recommended Batteries

Check out all our pre-built quads and our Diatone products!

Specifications

  • Antenna: Linear Dipole
  • Weight: 70g (Without Battery)
  • Wheelbase: 85mm
  • Propellor Size: 40mm
  • Receiver: Mamba MSR D16

Runcam Nano 2

  • Image Sensor: 1/3" CMOS
  • Horizontal Resolution: 700TVL
  • Min. Illumination: 0.01Lux@1.2F
  • Power: DC 3-5.5V
  • Current: 110mA@5V 120mA@3.3V
  • Net Weight: 3.2g
  • Dimensions: 14x14x16mm

Diatone Mamba TX500

  • Working Voltage: 4.5- 5.5V
  • Working Current: 380mA (5V/500mw)
  • Working Temperature: 90 ℃
  • Size: 24×11.7×5.5mm
  • Antenna Connector: IPEX
  • Video Format: NTSC / PAL
  • Protocol:IRC
  • Output Power: 25mw/200mw/500mw
  • Mounting Pattern: 20x20mm
  • Weight: 2g

Mamba F405 Mini MK2 Flight Controller

  • Input: 2-6S Lipo
  • BEC: 5V/2A
  • MCU: STM32F405
  • Gyro: MPU6000
  • FLASH: 16M
  • OSD: AT7456
  • Firmware Target: FURYF4OSD (LEGACY)
  • Mounting Hole: M3
  • Weight: 3.5g

Mamba F25 Mini ESC

  • Input Voltage: 2-5s Lipo
  • Continuous Current: 30A
  • Burst Current: 40A (10S)
  • BEC: No
  • Mounting Pattern: 20×20mm,⌀ 2

Diatone Toka 1103 10000KV

  • Rated Voltage: 2S (8.4V)      
  • Prop: 1.6inch~3inch                                            
  • Peak Current: 8.6A
  • ldle Current4V/0.5A                                                                
  • Maximum Power: 70W
  • Internal Resistance158Ω
  • Overall Dimension:Φ14.8×9.8mm
  • Installation hole position: 9×9mmM2                                                            
  • Bearing:4x1.5x2                                              
  • Shaft Diameter:1.5mm
  • Lead Wire Size24AWG×100mm
  • Slots/poles: 9N12P
  • Magnet Wire: 240 Enameled Wire
  • Stator Diamter11mm
  • Stator Height :3mm
  • Weight: 4.1g (No Wires)

Includes

  • 1x Diatone BNF Roma F1 1.6" Quad
  • 2x Lipo Straps
  • 1x Set of GemFan 1636 Props
  • 4x Ducts (2 Gray, 2 Blue)
x