FatShark Shark Byte Digital HD FPV System Bundle

$319.00
Coming Soon
In Stock
Pre Order
Add to Wishlist
Free Delivery on U.S.A. Orders $50 or more

This bundle has all you need to start flying in crispy digital HD, just grab some antennas for the VTX and module and you're good to go!

Bundle includes the Shark Byte module, TX5S.1 VTX, and the RunCam Nano HD

Goggles not included

This incredible goggle module is compatible with FatShark Dominator goggles, delivering low latency 720P@60fps HD footage via the standard 5.8GHz FPV frequencies. SharkByte supports up to eight operators flying simultaneously without interfering with analog bands.

The Shark Byte module includes built-in DVR and directional antennas. It seamlessly integrates with your goggles, leaving the analog module bay unobstructed and ready for use, just simply toggle between digital or analog. The onboard 

The module and goggles can be powered via an existing FatShark battery or via an XT60 adapter with a regulator to supply the required 8.4V to both module and goggle from a 3-4S LiPo.

Image clarity has been improved upon with a new fully digital MIPI camera made by RunCam; the RunCam Racer HD. Its small 14x14mm footprint fits in even the smallest builds and comes with an adapter to fit larger grames. The camera has OSD for custom tuning, access it through your TX sticks or a button board.

Make sure to grab a U.FL VTX Antenna for the VTX and SMA Antennas for the Module!

Browse our FatShark products and all things Shark Byte!

Features

  • Digital HD 720p@60FPS
  • Integrated Directional Antennas
  • Built in DVR

Specifications

FatShark Shark Byte RX5.1 Receiver Module

  • Input Power: 5.5mm Barrel Connector, 8-16V Center Pin Positive
  • Operating temperature: 32°-104°F (0°-40°C)
  • Compatible Headsets: Fat Shark Dominator series
  • Operating temperature: 32°-104°F (0°-40°C)
  • Dimensions: 105 x 21 x 39mm
  • Weight: 80.3g

FatShark TX5S.1 Digital HD VTX

  • Output Power: 200mW
  • Connector: U.FL
  • Mounting Pattern: 20x20mm, 25.5x25.5mm, M2 & 30x30mm, M3
  • Footprint: 32.5x32.5mm
  • Weight: 5.7g

RunCam Nano HD FPV Camera

  • Interface: 20Pin
  • Image Sensor: Super WDR CMOS Sensor
  • Resolution:
  • 1280*720@50fps 1280*720@60fps
  • Lens FOV: 140°
  • Shutter: Rolling Shutter
  • Power: DC 3.3V
  • Current: 350mA@3.3V
  • Housing Material: ABS
  • Net Weight: 5g
  • Dimensions: 14x14x18mm

Includes

  • 1x FatShark Shark Byte RX5.1 Receiver Module
  • 1x Fatshark Shark Byte TX5S.1 
  • 1x Fatshark Runcam Nano HD for Shark Byte

Manual

x