Flywoo BNF Firefly Baby HD 1.6" Quad w/ Vista & Nebula Nano - FrSky XM+

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $60 or more
Add to Wishlist

In an effort to push the boundaries of carrying the camera on the smallest platform, Flywoo designed the smallest quadcopter possible in their history. The Firefly Baby Quad is a nano-sized FPV drone designed to carry Insta 360go, or SMO 4K camera for some action flying.  Weighing in at just 47g, the Firefly Baby Quad is small, flexible, and stable. It's full of power and offers unmatched control. Pilots can quietly enjoy the fun of shooting a video without jelly. The Baby Quad is equipped with GOKU F745 13A STACK and ROBO 1202.5 5500KV motors. Perfect for the indoor and outdoor recording of every beautiful flying moment!

Check out our other pre-built quads, as well as the rest of our Flywoo selection!


  • Frame: Flywoo Firefly Baby
  • Propellors: HQ 40mm 4 Blade Props
  • Receiver: PNP / XM+ / TBS Crossfire
  • Weight: 59g

Caddx Vista w/ Nebula Nano

  • Model: Vista K
  • Weight: Vista KIT(camera included):24g/Antenna:2.5g
  • Dimensions:
  • Vista Kit: 30x29x13mm
  • Camera: 14x14x21mm
  • Coaxial Cable:80mm/120mm
  • Operating Frequency: 5.725-5.850GHz
  • Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm
  • Min. Latency (end-to-end):720p 60fps: 32ms
  • Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
  • I/O Interface: USB-C,IPEX,3-in-1 Port
  • Supported Flight Control System: F3,F4,F7
  • Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
  • Input Power: 7.4-26.4V
  • Power output: 25mW/200mW/500mW/700mW
  • Hardware included:Vista/Nebula nano/Coaxial cable/Antenna
  • Goggles: work with DJI goggles
  • Camera: Sensor: 1/3''CMOS
  • Lens: 2.1mm,f/2.1
  • Shutter: Rolling shutter
  • FOV: 150°[D],122°[H],93°[V]

Flywoo GOKU F745 Flight Controller

  • Dimensions: 22*23mm Weight: 2.3g
  • Mounting Pattern: 16*16, M3 Holes
  • MCU: STM32F745
  • UARTS: 1/2/3/4/5/6/7
  • I2C: SCL/SDA
  • GYRO: MPU6000
  • BARO: BMP280
  • BEC: 5V 2A
  • LED: 4*WS2812
  • FLASH: 8M
  • Input Voltage: 2-4S
  • Firmware: FLYWOOF745NANO

Flywoo GOKU BS13A 4in1 ESC

  • Support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
  • Input Voltage: 2-4S Lipo
  • Continuous Current: 13A
  • Firmware: BLHELI_S
  • Mounting Pattern: 16x16mm, M3 Hole
  • Weight: 2.5g

    Flywoo ROBO 1205.5 5500v Motor

    • Stator Diameter: 12mm
    • Stator height: 2.5 mm
    • Kv: 5500Kv
    • Bearings: NSK
    • Wire Length: 120 mm
    • Shaft size: 1.5mm
    • Mounting Screw Pattern: 9×9 mm
    • Input Voltage: 2-3S
    • Weignt:3.8g


      • 1x Flywoo BNF Firefly Baby HD 1.6" Quad