Flywoo BNF Firefly FR 1S Nano Baby V1.2 40mm Quad - Choose Version
The Firefly 1S FR is true X variation of the original. It sacrifices some flight time, but has more agility and power! It is perfect for a freestyle ripper. Firefly FR 1S Nano Baby Quad is a 20g ultralight 1S Quad for freestyle and cruising. Through a lot of tests, we found the best configuration for Firefly 1S nano baby quad! Last but not least, it is very quiet, like a mosquito, suitable for both indoors and outdoors.
If you're looking for a similar platform with longer flight times, try out the Original Firefly Nano Baby!
Check out the rest of our pre-built quads, as well as the rest of our Flywoo selection!
Specifications
- Weight: 22g
- Props: Gemfan 40MM 1635-3
- Battery Connector: GNB 27 with an adapter to PH2.0
GOKU Versatile F4 5-IN-1 1S AIO FC / 25-250mW VTX
- Input Voltage: 1S LiPo
- MCU: STM32F411CEU6
- Gyro: MPU6000
- OSD: yes
- UARTs: 2 Sets
- FC Firmware: FLYWOOF411_5IN1_AIO
- ESC Firmware: O_H_5_REV16_8.HEX
- BEC: 5V
- Current Sensor: yes
- Buzzer: no
- ESC Max Continus Current: 5A
- Stack Size: 25x25mm
- Weight: 4g
Flywoo ROBO 0802.4 19500Kv Motor
- Kv: 19500Kv
- Input Voltage: 1S LiPo
- Stator Dimensions: Φ8mm x 2.4mm
- Shaft Diameter: Φ 1mm
- Mounting Pattern: 7mm Φ
- Wire Dimensions: 30AWG x 40mm
- Weight (w/ wires): 1.8g
- Image Sensor: 1/3" CMOS Sensor
- Horizontal Resolution: 1200TVL
- Aspect Ratio: 16:9
- Signal System: NTSC, PAL
- Lens Size: 1.8
- Minimum Illumination: 0.001Lux @ F
- Input Voltage:1S
- Dimensions: 14x14xmm
- Weight: 1.2g
RunCam Thumb
- Resolution: 1080p@60fps
- Video Format: MP4
- Gyro: Built-In
- Communication Interface: Micro USB
- SD Card Compatibility: 128GB Max
- Power Input: 5V
- Dimensions: 52x13x19mm
- Weight: 9.8g
Includes
- 1x Flywoo BNF Firefly FR 1S Nano Baby V1.2 40mm Quad
- 2x Sets of Gemfan 40MM 1635-3 Props
- 1x Spare Hardware Set
