Cart 0

Frsky F3EVO FC with Built-in XM+ Receiver - XMPF3E

  • $19.99
  • Save $20

FLASH SALE - Please note, we cannot accept returns on this item.


Built-in F3EVO and XM+ receiver module, the latest Accelerometer, Gyro, Compass and Baro sensor. Also, XM+ receiver is a full duplex receiver, it will receive the commands of radio and send to F3E by SBUS (8CH is RSSI) to UART2 Rx of F3E. After configuration, you can use the FrSky X9D/X9D-Plus/X9E radio (wireless) to set the PID parameters for XSRF3E. 6 PWM output signal lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.


  • Dimension: 36×36×6mm (L × W × H) with 30.5mm mounting holes
  • Hardware: STM32F303 CPU (72Mhz inc FPU), MPU9250 (accelerometer/gyro/compass), and BMP280 barometer for F3E
  • Weight: 6g
  • Channels: 16CH (8CH is RSSI) by SBUS to UART2 Rx of F3E, Smart Port of XSR to UART3 Tx of F3E
  • Operating Voltage Range: 4.0~10V
  • Operating Current: 200mA@5V
  • Compatibility: FrSky Taranis X9D/X9D-Plus/X9E/ Horus X12S/XJT in D16 mode
  • Firmware Upgradeable


  • The F3E runs the open-source Cleanflight/ Betaflight flight control (FC) software and firmware upgradeable (SPRACINGF3EVO), the factory firmware is betaflight_3.0.1_XSRF3E
  • The XM+ receiver runs the software which was developed by FrSky and firmware upgradeable


  • 1x XMPF3E
  • 1x Manual
  • 1x Brake-out cables for connecting to ESCs
  • 6x pins header connectors for optional soldering to the XMP

We Also Recommend



Sold Out