GEPRC BNF CineRun HD3 3" Micro Cinewhoop w/DJI Air Unit - Choose Your RX

$358.79
$233.21
In Stock
Pre Order
Coming Soon
Add to Wishlist
Free Delivery on U.S.A. Orders $50 or more

CineRun HD3 is an awesome cinema drone with the latest DJI Digital FPV System. It  can achieve amazing cinematic footage from a 3-inch platform! CineRun HD3 is mainly used for capture crisp HD footage. It’s extremely light weight. The whole thing weighs only 203G and during flight is enormously agile.

CineRun HD3 this is one of the the best ready-made Cinewhoops. Engineered, professionally assembled and tuned by GEPRC team. You have to try this one!

Available configured with DJI Air Unit as receiver, or with FrSky XM+

Check out all our DJI compatible gear, our pre-built quads and our GEPRC selection!

Features

  • No Propellers  in the view.
  • Perfect for DJI FPV HD(720p 120fps FPV)
  • Equipped with a 3-inch guard frame, Ensure safety and reliability
  • Full 3K Carbon Fiber
  • System:STABLE PRO F7 35A
  • Black Box: 32Mb onboard flash memory.
  • Full Soft Mounted FC System: Provides a clean operating environment for gyro.
  • Exquisite Assembly Process: Eliminate any potential installation problems.
  • Weight:203g(without battery and GoPro Mounts TPU)

Specifications

Frame

  • Full 3K Carbon Fiber
  • Side plate : 1.5mm
  • Top plate : 2mm
  • Bottom plate : 3mm
  • Side plate : 2mm
  • Wheelbase : 155mm
  • Motors: GR1404 3850KV
  • Recommended Battery:4S 850mAh (No inclued)
  • Recommended Camera:GoPro Hero 7/8(No inclued)
  • Operating Frequency: 5.725-5.850 GHz
  • Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm
  • Min. Latency (end-to-end)
  • Low Latency Mode (720p/120fps): <28 ms
  • High-Quality Mode (720p/60fps): <40 ms
  • Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
  • Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)
  • I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
  • Operating Temperature Range: 32° to 104°F (0° to 40°C)
  • Input Power: 7.4-17.6 V, about 4-9 W
  • Sensor: 1/3.2” CMOS; Effective Pixels: 4 M
  • Lens: 2.1 mm, f/2.1
  • Shutter: Rolling shutter
  • ISO: 100-25600
  • FOV: 150°(D); 122°(H); 93°(V)
  • Dimension: 22.1 × 21.1 × 20.1 mm

Electronic System(STABLE PRO F7 35A)

STABLE PRO F7 Flight Controller

  • Model:STABLE PRO F7 35A
  • MCU: STM32F722RET6
  • IMU: 2x ICM20689(SPI)
  • BlackBox: 32Mb onboard Flash
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Baro:NO
  • BEC Output: 5V@3A
  • Integrated LC Filter
  • Input Voltage: 2-6S Lipo
  • Firmware target: EXF722DUAL
  • Size: 26x26mm board, 20mm mounting holes (M2)

STABLE PRO F7 ESC BL32 2-6S 4in1

  • MCU:STM32F051
  • Constant:35Amps
  • Burst:45Amps
  • Dimensions:31*31mm(including the power pads)
  • Mounting Holes:20*20mm,M2
  • Supports Dshot1200,Proshot,Oneshot,Multishot
  • Current meter: Yes
  • Target: GEPRC-BL32-4IN1
  • BLHELISUITE DOWNLOAD 

Includes

  • 1x CineRun HD3 Quadcopter
  • 1x GoPro 7 Mounts TPU
  • 4x 3inch Props(pairs)