GEPRC BNF Mark5 HD 4S 5" Deadcat Quad w/ DJI O3 Air Unit - PNP/DJI

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $99 or more
Add to Wishlist

The HD VTX ushered in a new upgrade, and the brand new VTX of the DJI O3 air unit pushed the digital system to a new level. The GEPRC team is also upgrading and optimizing the overall performance based on MARK5. At the same time, it will be equipped with a DJI O3 air unit to design the new MARK5 O3 version. The DC structure better suitable for  the O3 internal recording, as there are no propeller is visible during flight. While the X structure is more suitable for freestyle, though you are gonna see propeller is slightly visible during O3 internal recording.

Not fan of DC? well check out True X version instead and all our GEPRC products!


  • The DC structure is suitable for O3 internal recording when no propeller is visible during flight, while the X structure is more suitable for freestyle when the propeller is slightly visible during O3 internal recording.
  • Upgraded lens aluminum alloy side plate, durable and more visual impact
  • Built-in Bluetooth, supports mobile phone wireless connection for parameter tuning
  • Developed specifically for freestyle with a squashed X arm design.
  • The HD version uses DJI’s new O3 VTX, clear image, stable signal, low-latency, long-distance, and supports up to 4K/60fps recording
  • SPAN G50A BLHeli_32 4in1 50A ESC with the latest GEPRC 2107.5 motor, with strong power, fast response speed, precise throttle control, and smooth flight experience
  • Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment
  • With an independent capacitor and buzzer cabin, the operating environment of the whole drone is extremely stable, no shaking, no jitter
  • Two kinds of 3D printing camera mounts are designed, which can be mounted with a full range of GoPro cameras, as well as Naked GoPro 8, Insta 360 GO2 and Caddx Peanut cameras. The shooting effect is stable and clear
  • Add coral orange and emerald green colors to the O3 version to add more colors to your flight
  • MARK5 O3 is optimized for freestyle, with a smoother flight experience


  • Model: MARK5 DC HD O3 Quadcopter
  • Brand: GEPRC
  • Frame: GEP-MK5D O3/GEP-MK5X O3
  • Wheelbase: 225mm
  • Top plate: 2.5mm
  • Bottom plate: 2.5mm
  • Arm plate: 5mm
  • FC system: SPAN F722-BT-HD V2
  • MCU: STM32F722
  • Gyro: 42688-P(SPI)
  • OSD: BetaFlight OSD w/AT7456E chip
  • ESC: SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC
  • VTX: DJI O3 Air Unit
  • Camera: DJI O3
  • Propeller: Gemfan 5136
  • Antenna: DJI O3 antenna
  • Motor: SPEEDX2 2107.5-1960KV (6S Version) / SPEEDX2 2107.5-2450KV(4S Version)
  • Weight: 426.0g (MARK5 DC HD O3 including 3D printed parts)
  • Receiver: PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G
  • Recommended Battery: LiPo 4S 1300mAh-1800mAh (4S Version) / LiPo 6S 1050mAh-1550mAh(6S Version)


  • 1x MARK5 DC HD O3 Quadcopter
  • 4x Gemfan 5136 propellers 
  • 1x Battery strap M15x250mm
  • 2x Battery strap M20x220mm
  • 2x Battery Silicone Pads
  • 1x 3D printed parts
  • 1x Action cam mount holder
  • 1x Set of screws
  • 1x Set of screwdrivers
  • 1x Antenna fixed tube