GEPRC BNF CineLog 25 HD 2.5" Cinewhoop w/ Caddx Vista & Polar Camera - Choose RX

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $99 or more
Add to Wishlist

The most noteworthy feature of CineLog25 is the lightweight quadcopter that can be shoot video by GoPro Lite. It adopts the most popular backward push design on the FPV field at present. It can effectively use the thrust weight ratio of the propeller to obtain higher flight efficiency. In the overall layout of the drone, we put VISTA HD in the center of the quadcopter, so that the center of gravity of the quadcopter is in the middle, The propeller Inlet is smoother and the noise is lower. Redesigned the shock absorption structure of the camera mount and GoPro Lite, Eliminated the jelly of the camera and FPV camera, and we can use 3, 4, and 5 damping rings according to the flight state to obtain the best stability in vibration and noise.

Be sure to choose the version for your radio setup.

Find the recommended 4S 450-750mAh batteries here!

Check out our other pre-built quads, as well as the rest of our GEPRC selection.


  • The New camera damping system basically eliminates the video’s jelly and FPV camera’s vibration in terms of design, The damping construction can be adjusted the harder or softer to suit the Flight State. There are Three, Four and Five damping rings that can be used to provide sufficient stability in vibration and noise.
  • The CineLog Whoop Quadcopter adopts a brand-new stunning pusher frame design, Including ultra-light carbon plate and new material, strength increases by 20%, efficiency increased by 15%
  • Cinelog Whoop Quadcopter Increases the Air Inlet volume and it with the EVA foam cushioning, Reduce the Airflow Resistance in order to create extremely low flight noise and greater reduction of noise from external vibrations
  • High-efficiency power matching, The latest GR1404 4500kv(Upgraded Version) motor power output scheme and Brilliant Tune have further Improved the flight time
  • The CADDX VISTA was placed at the bottom, Optimized Design for the Air Inlet Structure. It’s a point of the greatest importance is a low center of gravity “pusher-style” inverted frame, increased efficiency of at least 15%


  • Motors: GR1404 4500kv
  • Propellor: Gemfan D63-3
  • Weight: 145.5g


  • Wheelbase: 109mm
  • Main Plate Thickness: 2.5mm
  • Arm Thickness: 2.5mm
  • Stack Size: 25x25mm
  • Motor Mount: 9mm Φ
  • Camera Mount: Nano
  • Weight: 47.8g


  • Input Voltage: 2-4S LiPo
  • MCU: STM32F411
  • Gyro: BMI270
  • OSD: Yes
  • ESC Connections: Yes
  • Firmware: MATEKF411
  • BEC: 5V 1A
  • Current Sensor: Yes
  • Buzzer: Yes
  • Barometer: No
  • Stack Size: 25x25mm
  • Dimensions: 32x32xmm
  • Weight: 7.3g

Polar Camera

  • Sensor: 1/1.8" Starlight CMOS
  • Min. Illumination: 0.00003Lux
  • Shutter: Rolling Shutter
  • ISO: 100-25600
  • S/N Ratio: >65dB (AGC Off)
  • Lens: F1.6 8MP
  • FoV: 162° Diag.
  • Aspect Ratio 16:9
  • Image Menu: Supported
  • Dimensions: 24x19x19mm
  • Weight: 9g

Vista Module

  • Input Voltage: 7.4-26.4V
  • Output Power: 25mW / 200mW / 500mW / 700mW
  • Dimensions:
    • Vista: 30x29x13mm
    • Coaxial Cable: 120mm
    • Antenna: 105x11.2mm
  • Weight: 28g (+1.5g for Antenna)


  • 1x GEPRC BNF CineLog 25 HD 2.5" Cinewhoop w/ Caddx Vista & Polar Camera - Choose RX