GEPRC RTF TinyGo LED FPV Ready To Fly Kit w/ Goggles, Radio Transmitter, Case & Drone

All products containing batteries must be shipped by a ground shipping method.

The GEPRC TinyGo LED version is a full-color RGB series whoop, specially designed and modified to celebrate the coming festival. Compare with the TinyGo Racing Version,  the TinyGo LED version replaces the EVO anti-collision sponge with LED straps. The total weight without batteries is under 55 grams. It lasts for 4-5 minutes in LED mode and 5-6 minutes in normal mode. There are 52 high-brightness small LED lamps in the whole Quadcopter. The LEDs can be programmed through Betaflight. You can customize the colors and styles as you wish. When flying at night, you can enjoy the pleasure of a colorful flight. It should be noted that the LED lamp won’t be waterproof, so please avoid flying in a wet environment. 

The TinyGO LED is an RTF Kit for Indoor Flights. The Kit contains high-definition 800x480px FPV Goggles and the latest TinyRadio GR8 Remote Controller. It supports 8 channels and is designed for indoor flights and novices. The transmitter has a good feeling of control and It is lightweight and easy to carry. The good point is that you don’t need to carry heavy equipment. With our customized GEPRC Fly Bag. it’s very convenient to go to the field, travel, and on Indoor flights.

The TinyGO LED can use its own charger to charge. The charger uses the Type-C interface. You can use the movable power bank to charge as well. 

The TinyGO LED can be flown for more than 4 minutes (Depending on flight habits). Its stable electronic equipment and extremely strong and tough frame material make the FPV very stable and durable for crashes. There is an EVA protection foam around the frame,  more elastic and hard to damage.

TinyGO LED is carefully assembled by the GEPRC team, with excellent performance. You can start a whole new journey and enter into FPV World. TinyGO will be the best choice for your first FPV Drone.

This looks like the beginning of a terrific flight Experience. Literally!

Check out our other RTF combos, all our pre-built quads, and our GEPRC selection!

Note: If you buy a drone only, If you have a new TinyRadio GR8 remote controller, it can be directly bound, and the old version of the GEPRC GR8 remote controller should be bound by flashing the old version of the CLI

Changelog

• January 12, 2022: TinyGo shipped today will have the new remote controller and the new charger version.
• December 16, 2022: VTX changed from 5.8G 25~200mW VTX to RAD Whoop 5.8G 400mw VTX
• December 16, 2022: The flight controller changed from GEP-12A-F4 to TAKER F411 8Bit 12A FC

Features

• TinyGO LED is very suitable for indoor flights. More than 4 minutes of flight time
• Using GEPRC-12A-F4 FC system is reliable and stable
• No Propellers in view. Anti-jamming VTX. NO Jello flight Footage. Stable flight picture quality
• The Newly Developed TinyRadio GR8 Remote Controller is specially designed for Novice and indoor flights
• It has High-Quality FPV Goggles, with High definition 800x480px., and a sensitive 5.8G receiver
• Ready To Fly Kit, Includes a GEPRC Fashion Fly bag. Portable and Lightweight.

Specifications

• Name: TinyGO
• Brand: GEPRC
• Frame: GEP-TG16
• Motor to Motor: 79mm
• FC: TAKER F411 8Bit 12A
• MCU: STM32F411
• IMU: 42688-P
• Blackbox: 16Mb
• OSD: BetaFlight OSD w/ AT7456E chip
• ESC: 8Bit 12A
• VTX: RAD Whoop 5.8G 400mw VTX
• Camera: Runcam Nano2/Caddx Loris 4K 60fps
• Propeller: GEMFAN 1636x4 (4 pairs)
• Motors: GR1102 10000Kv
• TinyGO LED Weight (Without Batteries): 55 Grams

Remote Controller

• TinyRadio GR8 Remote Controller
• Radio Frequency: 2.4GHz
• Radio Protocol: FHSS
• Channel:8
• Transmit Power: <20 dBm
• Antenna interface: SMA
• Low Voltage alarm: <6.6v
• Batteries: two 18650 batteries or a 2S battery. (not included)

Receiver

• Channel: 8
• Voltage: 5V
• Radio Frequency: 2.4GHz
• Radio Protocol: FHSS
• Range: 100 meter

FPV Goggle

• Resolution: 800x480px
• Size of Screen: 4.3 inch
• Whole Size: 155x144x113mm
• In-built batteries: 3.7v/2000mAh
• Working Hours: 2.5 Hours
• Weight: 314.6 Grams

FPV Batteries

• Batteries Capacity: 530mAh
• Voltage: 4.35v 1S1P
• Discharge rate: 90C
• Size: 61x16.7x7mm
• Weight: 12.7 Grams
• Interface: PH2.0

Charger

• Input power: 5v (USB Type C）
• Full charged Voltage: 4.35v
• Output current: 1Ah
• Charging: It can charge 2 PCS 1s HV lipo 4.35v HP2.0/GNB27 plug batteries at the same time

Includes

• 1x TinyGO LED Quadcopter
• 1x TinyRadio GR8 Transmitter
• 1x GEPRC FPV RG1 Goggle
• 1x GEPRC 1S LiHV 4.35v Charger
• 4x GEPRC LiHV 4.35v 90C Batteries
• 1x Battery strap