The Rekon 7 Pro is built for the most challenging long-range missions. Powerful yet efficient 2806.5 motors and 7" props ensure it can carry high payloads like a GoPro Hero 10 and large batteries. The design philosophy for the 7 Pro was "zero compromises"! It has a Full DJI Air Unit, M80 Pro GPS with an extra-large ceramic antenna, dual antenna mounts for Crossfire diversity receivers, and Express LRS as well as a fully-sized 30x30 stack. It's ready to conquer the highest mountain peaks!

Check out our other BNF quads as well as the rest of our HGLRC gear!

Specifications

• Input Voltage: 6S
• Wheelbase: 324mm
• Prop Size: 7"

Zeus F722 FC

• Product name: Zeus F722
• FC Firmware: HGLRCF722
• CPU: STM32F722 RET6
• MPU: BMI270
• BEC Output: 9V/1.5A,5V/2A
• UARTS: 5
• OSD: Support
• BlackBox: 16M

Zeus 48A BL_S ESC

• Input Voltage: 3-6S Lipo
• Max Continuous Current: 48A
• Max Burst Current: 55A
• Support Protocols: DShot600/300/150/Oneshot125/42, MultiShot

Rekon Motors

• Stator Size: 2806.5
• KV: 1250

Caddx Polar Air Unit

• Input Voltage: 7.4-17.6V
  
• Output Power: 25mW / 200mW / 500mW / 700mW
• Dimensions:
• Air Unit: 44x37.8x14.4mm
• Coaxial Cable: 110mm
• Sensor: 1/1.8" Starlight CMOS
• Min. Illumination: 0.00003Lux
• Shutter: Rolling Shutter
• ISO: 100-25600
• S/N Ratio: >65dB (AGC Off)
• Lens: F1.6 8MP
• FoV: 162° Diag.
  
• Aspect Ratio 16:9
  
• Image Menu: Supported

M80 Pro GPS

• Power Supply: 5V
• Antenna: Ceramic Antenna
• Receiving Format: GPS,GLONASS,GALILEO,QZSS,SBAS,BDS
• Receiving Channel: 72 Searching Channel
• Compass: QMC5883
• Support Rate: 115200dps
• Output Protocol: NMEA
• Output Frequency: 1Hz-10Hz,Default 10Hz
• Speed Precison: 0.05 m/s
• Level Positioning Precison: 2D ACC2.5m(ln Open Sky)
• Receiving Sensitivity: Trace -162dBm
• Capture: -160dBm
• Dynamic Characteristics: Max Height:50000m
• Max Speed: 500m/s
• Max Acceleration: 4G
• Working Temperature: -40℃-+85℃
• Storage Temperature: -40℃-+105℃

Includes

• 1x HGLRC Rekon7 Pro 7" 6S HD Quad
• 1x Accessories Pack