HIFIONRC F7PRO V2 30x30 Flight Controller for DJI
The HIFION F7Pro V2 has all the bells and whistles. Equipped with DJI plug and play capabilities, 6 UARTs, and built-in Bluetooth.
- HIFIONRC F7 PRO V2 has wireless Bluetooth parameter modulation, and the UART used for bluetooth parameter modulation is UART4_MSP，The Bluetooth signal is isolated and does not interfere with the receiver and the rest of the equipment（If we don't find the bluetooth antenna, don't worry, we hid it）
- This FC includes a DJI HD cable by default. If you use DJI HD, this means you don't need to buy a separate FC and DJI HD cable.Don't worry if you're using a traditional Video TX.
- The flight controller comes with an AT7456 chip, allowing you to still use OSD functionality.
- The STM32F722 MCU has a built-in inverter, so the receiver can be installed in any RX. Used when opening the corresponding UART serial digital receiver (default is RX2_UART2).
- Bluetooth: Yes
- MCU: STM32F722RGT6 216 MHZ
- IMU: MPU6000
- OSD: Betaflight SPI OSD & DJI HD OSD(UART6)
- UART: 6
- BEC:5V/3A & 10V/2.5a Dual BEC
- Input voltage: 3-6S
- Black box: 16MB
- Use firmware: HIFIONRC F7
- LED: 4-way LED independent plate, supports WS2812 programming LED output.
- Receiver: Supports Sbus, CRSF, IBUS, Spektrum 1024/2048, Sbus, XBUS, SumD and SumH RX built-in reversers,supports 3.3V Spektrum satellite receiver.
- Installation size: 30.5mm×30.5mm
- External dimensions 40mm×40mm
- Weight: 7 grams
- 1x HIFIONRC F7PRO V2 30x30 Flight Controller for DJI