iFlight BNF Chimera7 7" Long Range Quad w/ iFlight Racecam Micro - TBS CRSF

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $60 or more
Add to Wishlist

A super efficient iFlight 7inch Long-Range bird, complete with GPS.

Check out other pre-built quads, as well as the rest of our iFlight selection!


  • 6mm rigid arm design for more stiffness
  • Top- and bottom battery mount option
  • XING 2806.5 efficient wide stator motors
  • GPS pre-installed for more safety at a distance
  • TPU Base Mount for Gopro Camera (Camera and Camera Mount are NOT included)
  • 360° TPU protection, FPV cam protection, and antenna mounts
  • 800mW high power adjustable VTX
  • Battery voltage LED status light (illuminated IF logo on the bottom)


  • Wheelbase: 320mm
  • Weight: 628.1 ( without Battery)
  • Camera: iFlight Racecam Micro

Chimera7 Frame

  • Wheelbase: 320mm
  • Main body dimension: 285*199mm
  • Bottom to top distance: 20mm
  • Arm thickness: 6mm
  • Bottom plate thickness: 3mm
  • Top plate thickness: 2mm
  • Upper(middle) plate thickness: 3mm
  • Camera plate thickness: 3mm (included TPU inserts)

SucceX-D F7 V2.1 TwinG Flight Controller

  • MCU: 216MHz STM32F722
  • Gyroscope: 2x ICM20689
  • Barometer: YES
  • Blackbox: 32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale: 100
  • Inverter for SBUS input (UART2-RX)
  • Smart audio & Tramp VTX protocol supported
  • Beeper pad: Yes
  • RSSI input pad: No
  • UARTs: 5
  • Motor outputs: 8
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry: RX5
  • Input voltage: recommended 2-6S, MAX 8S
  • Firmware Target: IFLIGHT_F722_TWING
  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • Dimensions: 36x36mm
  • Weight: 7.5g
  • USB type-C

SucceX 50A BLHeli_32 4in1 ESC 

  • MCU: STM32F051
  • Up tp 48kHz PWM frequency
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 50A / Burst: 60A
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to Dshot1200, Proshot, Oneshot, Multishot
  • Target: iFlight-BL32-4IN1
  • Weight: 14.4g
  • Size: 43x39mm (including the power pads)
  • Mounting Hole: 30.5x30.5mm/Φ3mm

XING 2806.5 1300KV Motor

  • Voltage: 2-6S
  • KV: 1300KV
  • Configuration: 12N14P
  • Bearing: NMB 11*5*5
  • Stator Diameter: 28
  • Stator Length: 6.5mm
  • Shaft Diameter: M5
  • No.of Cells(Lipo): 2-6S
  • Weight: 49.5g(with a short cable)
  • Motor mount hole: 19x19 φ3mm

SucceX Force 5.8GHz 800mW VTX Adjustable

  • Input voltage: 7-36V
  • Output voltage/ Max current: 5V 1A
  • 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@100mW,250mA@400mW, 380mA@800mW
  • Channels: 40
  • Power Output: PIT/25mW/100mW/400mW/800mW


    • 1x iFlight BNF Chimera7 7" Long Range Quad w/ iFlight Racecam Micro - TBS CRSF