iFlight BNF DC3 HD 3" Cinewhoop Quad w/ DJI Air Unit - Choose FRSKY or DJI

Coming Soon
In Stock
Pre Order
Add to Wishlist
Free Delivery on U.S.A. Orders $50 or more

The DC3 HD Quad BNF features the amazing new DJI Digital FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This DC3 DJI Frame is a mini 3-inch quad which is no prop in view, equipped SucceX-D Mini F7 Stack and popular XING motor, everything you just need to bind and fly!

Check out all our DJI friendly gear and all our iFlight products!


  • No Prop in view
  • Equipped with SucceX-D Mini F7 + 40A ESC Stack
  • Bind and Fly Built and test flown by our Pilot Team
  • Equipped with the DJI FPV Air Unit -Bind and Fly
  • Buttery-smooth 720p 120fps FPV feed
  • Pre-tuned with smooth freestyle settings
  • Full 3K Carbon Fiber airframe with chamfered arms
  • Equipped with XING 1404  motors
  • Weight:160g without battery



    • Input voltage:2-6S
    • MCU:216MHz STM32F722
    • Gyro:TwinG ICM20689
    • Blackbox:32MB
    • Betaflight OSD:YES
    • BEC:5V 2.5A
    • 9V 2.5A 18W Design for DJI FPV Air Unit
    • Uarts:5
    • ESC Telemetry:UART5
    • INA Pad:UART2
    • Dimensions: 27x27mm
    • Mounting Dimensions: 20x20mm, M3 


    • Input Voltage: 2-6S 
    • Constant Current: 40A
    • Burst Current : 45A
    • MCU: STM32F051K66
    • Current Sensor: Yes
    • Telemetry: Yes
    • Installing Hole: 20x20mm, M3
    • Dimensions: 31*31mm(including the power pads)
    • Mounting Holes: 20*20mm
    • Weight:16.7g
    • Supports Dshot1200,Proshot,Oneshot,Multishot
    • Target: iFlight-BL32-4IN1
    • BLHeliSuite download 

    DJI Digital FPV System Air Unit

    • Input Power 7.4-17.6 V, about 4-9 W
    • Operating Frequency: 5.725-5.850 GHz
    • Transmitter Power (EIRP) FCC/SRRC: <30 dBm;
    • CE: <14 dBm
    • Min. Latency (end-to-end) Low Latency Mode (720p/120fps): <28 ms
    • High Quality Mode (720p/60fps): <40 ms
    • Max. Transmission Distance FCC/SRRC: <4 km; CE: <0.7 km
    • Video Format MP4 (Video format: H.264; Audio format: ACC-LC)
    • I/O Interface USB-C, MMCX, 3-in-1 port, microSD card slot
    • Supported Flight Control System F3, F4, F7
    • Operating Temperature Range 32°to 104°F (0° to 40°C)
    • Weight: Air Unit (Camera included): 45.8 g
    • Air Unit Dimensions: 44×37.8×14.4mm
    • Camera Dimensions: 27.4×21.1×20.1mm
    • Coaxial Cable Length: 100mm


    • 1x Prebuilt and tested DC3 HD Quadcopter
    • 1x DC3 HD Frame
    • 1x Frsky XM+
    • 1x DJI Digital HD FPV Air Unit (FPV Camera + Air Unit Module)
    • 1x TPU Bracket for DJI Air Unit Module
    • 1x TPU Antenna holder for DJI antenna
    • 2x TPU camera side plate soft mount
    • 1x iFlight Lipo Strap 
    • 2x HQ T3x3x3 Propeller (Set of 4 - Color May Vary)
    • 4x XING 1404 4600KV Motor 
    • 1x SucceX-D Mini F7  Flight Controller
    • 1x SucceX-E mini 35A 4in1 BLHeli-S ESC
    • 2x DJI FPV Air Unit Antenna (MMCX 90° - Pair) (From Air Unit Packaging)