The new iFlight Nazgul Evoque is a true work of art. They have added stack protectors to make sure you never have unwanted debris on your stack. The XT60 connector is mounted to the body, meaning that it cannot shift in flight leading to a cut lead. It also sports built-in LEDs to make sure your drone is always the center of attention.

This is the 6S Analog Version. HD Version available here!

Check out our other pre-built quads, as well as the rest of our iFlight selection!
  

 Features

• Lightweight Side Panels - Keep Your Rig Clean
• Secured Integrated XT60 Battery Plug - As Safe, It Can Be
• High-Performance Electronics - New Blitz Mini Stack
• XING E PRO 2207 Performance Motors 
• Illumination - Let It Be Green!
• SucceX Force 600mW - Analog Reliable Power
  

Specifications

• Weight: 392.6g 
• Propeller Size: 5"

iFlight Blitz Mini F7 FC

• MCU: STM32 F722
• Gyro: MPU6000
• Baro: NO
• OSD: IFLIGHT OSD （AT7456E）
• BEC: 5V 2.5A
  
• BlackBox: 16MB

• UARTS: 5 
  UART1 for VTX HD/Analog
  UART2 for  Receiver
  UART3、UART4 for GPS or other sensors that require a serial port
  UART6 for ESC Telemetry
  

• 1x I2C    
• 1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM （5V/BAT/G/VO/T1/R1 /5V/G/VI）
• 1x SH1.0 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G)
• 1x SH1.0 6pin connector for Any Receiver or DJI（3V3/R2/5V /G/R2/T2）
• 1x SH1.0 4Pin  connector GPS (T4/R4/G/5V)
• 1x SH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)
• 4x 0402 LEDs for FC STATUS (3.3V Red) / (Start Blue) / (5V Green)/（BAT Orange）
• VTX protocol: Smartaudio & IRCTramp  supported
• WS2812 LED Strip：Yes
• Beeper：Yes
• Firmware: IFRC-IFLIGHT_BLITZ_F722
• Dimensions: 30.5*27mm / 20*20mm φ4 mounting
• Weight: 5.0g 

iFlight Blitz Mini E55A 4in1 ESC

• Input: 2-6s LiPo
• Constant: 55 Amps (per channel)
• Burst: 60 Amps (per channel)
• MCU: BB21
• Target: QH-50 16.7
• BEC: No
  
• BlHeli32 telemetry: Yes
• Dimensions: 42x35mm 
• Mounting Dimensions: 20x20mm, 3mm (2mm w/ grommets)
• Weight: 11.3g  

SucceX Mini Force 600mW VTX

• Power: PIT/25/200/400mW/600mW
• Antenna Interface: MMCX
• VTX protocol: IRC Tramp
• Output:  40 channels

XING E Pro 2207 1800Kv Motors

• Kv: 1800
• Input Voltage: 4-6S
• Configuration: 12N14P
• Magnets: N52SH Curved
• Max Continuous Current: 42.63A
• Internal Resistance: 46.8mΩ
• ldle Current@10V: 2A
• Motor Dimensions: Φ28.5x19.7mm
• Stator Dimensions: Φ22x7mm
• Shaft Diameter: 4mm Steel
• Bearing Dimensions: 9x4x4mm
• Output Shaft Dimensions: ΦM5x15mm
• Wire Dimensions: 20AWG x 150mm
• Mounting Pattern: Φ16mm, 4x M3
• Weight (w/ wires): 33.8g 

Includes

• 1x iFlight BNF Nazgul Evoque F5D Deadcat 5" Quad - 6S - Choose Receiver