iFlight BNF Nazgul5 V2 5" Quad w/ iFlight Racecam Micro - Choose Your Version

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $80 or more
Add to Wishlist

The Frsky receivers comes pre-loaded with ACCESS firmware, Non-FrSky Radios and FrSky radios with ACCST will be rendered unable to bind. Please flash your RX with the legacy firmware to remedy this issue.

The Nazgul5 V2 is a high performance 5" bind and fly quadcopter built on the updated XL5 V5 frame. Now featuring the iFlight Racecam Micro and a SucceX-E F7 flight stack that's pre-tuned and ready to rip. Just bind your transmitter and fly! Loads of power and smooth flights are guaranteed using the new XING-E PRO unibell motors with long lasting NSK bearings. 

4S version comes equipped with 2750Kv motors and 6S with 1800Kv

Check out all our pre-built quads, and all our iFlight gear!


  • 5mm arm design for more durability
  • Easy-Swap arms
  • LED illuminated Logo
  • XING-E PRO 2207 (4S 2750Kv / 6S 1800Kv)
  • iFlight Racecam Micro
  • 25-800mW VTX
  • 5" version also fits 5.1" style propellers
  • Popular True-X configuration
  • TPU crash-guards
  • Fits both 30.5x and 20x stacks
  • F7 Flight controller
  • 45A ESC


  • SucceX-E F7 45A flight stack
  • XING-E PRO 2207 (6S 1800kv / 4S 2750kv)
  • Wheelbase: 240mm*240mm 
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)
SucceX-E F7 Flight controller
  • MCU: STM32F22RET6 (216MHz)
  • Gyro:MPU6000
  • Baro: DSP310
  • Blackbox:16MB
  • UARTS: 4 (1 2 4 5)
    • UART1 - VTX HD(Vista or Air Unit) or Analog Telemetry

    • UART2 - Receiver

    • UART4 - Free 

    • UART5 - ESC Telemetry

  • Dshot/PWM outputs: 4
  • WS2812 led Strip:YES
  • Beeper:YES
  • Input Voltage:2-6S
  • BEC: 5V/2.5A 
  • Firmware: IFLIGHT_SUCCEX_E_F7
  • Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
  • Dimensions:36*36mm
  • Weight:6.9g

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • Supports 2-6S Lipo input
  • STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
  • Current sensor: YES
  • BEC: NO
  • Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
  • Target: G-H-30 BLS 16.7
  • Dimension: 40*43mm
  • Mounting Holes: 30.5*30.5mm/Φ3mm
  • Weight: 14.4g

SucceX-Force 800mW adjustable VTX

  • Full format video format: NTSC /PAL
  • Input voltage: 7V~36V,+12V/380mA@800mW;
  • Channels: 48
  • Power Output: PIT/25mW/200mW/400mW/800mW
  • Output voltage/ Max current: 5V 1A
  • Weight: 7.2g


  • 1x iFlight BNF Nazgul5 V2 5" Quad w/ iFlight Racecam Micro

SucceX-Force 800mW VTX Table

iFlight Wiring Diagram and CLI Dump