iFlight BNF ProTek35 HD 3.5" Cinewhoop w/ Caddx Vista and Polar Micro - 4S - Choose Version
iFlight's 3.5inch project is ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here...
ProTek is not necessarily just a Cinewhoop series but far more. Equipped with Xing 2205 motors in a higher kv class will give you all the power you need to get good speed, do some freestyle or carry a full GoPro through tiny gaps.
A lot of thought was put into the different assembly options. iFlight's stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).
Durable plastic protectors with copper standoffs, portable compact design, easy accessible UBS port without disassembly, LED battery status, and a universal mount for Insta360 or GoPro.
Pre-Tuned & Pre-Setup
- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
- To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
- Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
- Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"
- AIO: iFlight Beast F7 55A AIO V2
- Motor: XING 2205 3200KV
- Wheelbase: 151mm
- Dimensions: 118*94.5mm
- Bottom plate thickness: 3.5mm
- Top plate thickness: 2mm
- Top and bottom plate spacing: 20mm (aluminum standoff height)
- Propeller size: 3.5 inch
- FC pattern: 25.5x25.5mm / 20*20mm
- FPV cam spacing: 20mm
- Weight: 348.3g (without battery)
iFlight Beast F7 55A AIO V2
- Input Voltage: 2-6S Lipo
- MCU: BGA-STM32F745
- OSD: IFLIGHT OSD (AT745E）
- UARTS: 5
- FC Firmware: IFLIGHT_F745_AIO_V2
- BEC: 5V 2.5A
- Current Sensor: Yes
- Barometer: No
- Max Continuous Current: 55A
- Max Burst Current: 60A
- ESC Firmware: G-H-30 BLS
- Dimensions: 32.5*32.5mm
- Mounting Pattern: 25.5*25.5mm/Φ3mm
- 1x iFlight BNF ProTek35 HD 3.5" Cinewhoop w/ Caddx Vista and Polar Micro