iFlight Defender 25 Blitz F745 2-6S AIO Flight Controller w/ 20A ESC

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $99 or more
Add to Wishlist

This next-generation F7 AIO is designed for Defender 25. A future-proof all-in-one FC will step up the game and make more room for future flight firmware development like Betaflight, Emuflight, etc. Lightweight, minimum size, minimum work. Solder your motor wires on and let's go! 

Be sure to check out our AIO Collection as well as more products from Flight!


  • Pass-through DJI O3 and Caddx Vista/Polar Connector
  • MCU: STM32F745, 216MHz
  • Gyro: ICM42688P
  • Blackbox: 32MB Onboard Flash
  • Gyro: DPS310
  • Weight: 12.8g±0.2g


iFlight Defender 25 Blitz F745 AIO Flight Controller

  • MCU: STM32F745
  • Gyro: ICM42688P
  • Blackbox: 32MB Onboard Flash
  • BEC output: 5V 2.5A
  • WS2812 LED Strip: Yes
  • Buzzer: Yes
  • Barometer: DPS310
  • Connector: SH1.0 to Type-C adapter
  • OSD Chipset: Yes
  • Mounting pattern: 25.5x25.5mm φ3mm
  • Dimensions: 32.5x32.5mm
  • Input voltage: 2-6S, support LIHV battery
  • Smartaudio / IRC Tramp VTX protocol supported


  • ESC MCU: STM32G071
  • Driver: FD6288
  • Input voltage: 2-6S Support LIHV battery
  • Output current: 20A, peak value 30A (10 seconds)
  • ESC firmware: IFLIGHT_BLITZ_G071_01
  • Current sensor: ratio 200 (1/10mV/A)
  • BEC: NO
  • ESC Telemetry: Yes(PCB routed, set UART6 for telemetry)
  • Bidirectional DShot: Yes
  • Supports DShot DShot150/300/600/MultiShot/ OneShot etc.


  • 1x Defender 25 BLITZ F7 AIO
  • 2x Capacitor 470uF/35V (Onboard)
  • 1x XT30U Male 18AWG cable 70mm
  • 1x 1.0-7P cable 50mm-28mm
  • 1x 1.0-7P cable 50mm
  • 4x M2 silicon grommets
  • 8x M2x12mm screws
  • 8x M2 Transparent Nylon Nut
  • 10x 0.8mm black Heat shrink tube 10mm