Menu
Wishlist 0 Cart 0

Matek F405-STD Flight Controller w/ 32K Gyro, BFOSD, Barometer

  • $29.99

Add to Wishlist

The new F405 board from Matek is packed with a 32K Gyro, Baro, BFOSD and SD card slot. Using the ribbon connector with the Matek FCHUB-VTX or FCHUB-6S makes for a CLEAN build!

 Matek F405-STD Flight Controller w/ 32K Gyro, BFOSD, Barometer

Matek F405-STD Flight Controller w/ 32K Gyro, BFOSD, Barometer

 Matek F405-STD Flight Controller w/ 32K Gyro, BFOSD, Barometer

 

  • MCU: 168MHz STM32F405RGT6
  • IMU: 32K ICM20602 gyro/accelerometer (SPI)
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • Built in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • SoftSerial on TX2, S5 or S6 optional
  • Camera control on S6 or DAC optional
  • Smartaudio & Tramp VTX protocol supported
  • Battery Voltage Sensor: 1:10
  • Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
  • BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
  • LDO 3.3V: Max.300mA
  • I2C1 SDA & SCL: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 6x PWM / DShot outputs without conflict
  • 2x 2812LED outputs option
  • 5x UARTs
  • 1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x pair I2C1 pads
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
  • 36x36mm PCB with 30.5mm mounting holes
  • w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable
  • w/ 4pcs M3 Anti-vibration Standoffs

 

 

 

 


Customer Reviews

Based on 2 reviews Write a review
Sale

Unavailable

Sold Out

Add to Wishlist