Matek F722 HD 30x30 Flight Controller for DJI

$52.99
In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $50 or more
Add to Wishlist

iNav and Betaflight compatible and packed with features, especially suited for long range builds.

Check out all our 30x30 FCs as well as the entire Matek selection!

Features

  • STM32F722
  • MPU6000
  • BMP280
  • 32M flash Blackbox
  • 10x PWM outputs
  • 6x UARTs, I2C
  • Dual BEC
  • 3~8S supported
  • DJI FPV OSD supported

Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 (SPI)
  • Baro: BMP280 (I2C)
  • Blackbox: 32M-byte Flash memory (SPI)
  • OSD: Support external DJI OSD/FrskyOSD, No Analog MAX7456 OSD built-in
  • 6x Uarts with built-in inversion
  • 1x Softserial_Tx option
  • 10x Dshot/PWM outputs
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, AirSpeed)
  • 2x SH1.0_8pin connector (Vbat/G/Curr/Rx3/S1~S10)
  • 1x SH1.0_6pin connector for DJI FPV Air Unit
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • Switchable 8V output
  • PWM camera control: Yes
  • TR/SA VTX control: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Analog Airspeed sensor: Yes
  • Digital Airspeed sensor: Yes
  • Input: 9~36V (3~8S LiPo)
  • BEC: 5V 2A cont. (Max.3A)
  • BEC: 8V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • No Current Sensor built-in
  • FC Firmware
  • BetaFlight unified target: MATEKF722HD(MTKS)
  • INAV target: MATEKF722PX
  • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
  • Dimensions: 36 x 36 x 5 mm
  • Weight: 6.5g

Includes

  • 1x Matek F722 HD 30x30 Flight Controller for DJI

F722-HD Quick Start Guide

  • BetaFlight unified target MATEKF722HD , or download betaflight firmware from HERE
  • Select “MATEKF722HD” in pull-down list of BetaFlight configurator when you flashing it.
  • In BetaFlight CLI mode, type   ” resource SERIAL_TX 11 A02 ” if you want to use TX2 pad as softserial1_TX.
  • If using FrskyOSD module,  enable FrskyOSD on Uart6 in BF configurator 10.7 or latest.

***

  • INAV target MATEKF722PX
  • INAV firmware has FrskyOSD enabled on Uart6 by default,  replace it with “DJI FPV VTX” protocol.
x