RDQ Complete Pack

$165.49
Coming Soon
Add to Wishlist

Introducing the RDQ Complete Pack! These parts were selected specifically for 4s quadcopters and sold together at a discount. known and loved by the community for their keen ability to push harder than any other, flight after flight, all while offering the user an unmatched level of value. 

Includes

1x Foxeer Arrow Micro Pro 1.8mm - Black
4x Badass 2205 2450kv Motors
4x RDQ 30a ESCs
1x Bardwell AIO F4 FC
1x FrSky XM+
1x Mach 1 VTX MMCX
1x MMCX to Dipole Antenna
18awg wire - 1 foot black/1 foot red (Not shown in picture)
22awg wire - 1 foot black/1 foot red (Not shown in picture)

 

Setup Recommendations

This setup is best on light to medium weight FPV frames like the Mach 1 Stretched X using 5" props and a 1300mah - 1500mah 4S battery of your choosing. If you do not already have a preference, we recommend the HQ 5x4.3x3 props and the 1300mah 4S 100C RDQ Series Battery.

  

Bundle Specifications

Foxeer Arrow Micro Pro

  • Great WDR Function 
  • Improved Image Processing
  • Easily Switch Preset Modes
  • OSD
  • High-Quality 2.1mm Lens
  • Supports 5-40V input

 

Badass 2205 2450KV Motor

  • 7075 Aluminum for increased durability
  • 16x16mm Bottom
  • 150mm long wires - great for 4-in-1 ESCs
  • Able to fly on 3s or 4s batteries
  • 0.2mm stator utilizing Kawasaki silicon steel
  • 20 AWG wire
  • N52H arm magnets
  • Japanese NSK 3x8x4mm Bearings
  • 26g weight - relatively light compared to many other motors 

 

RDQ ESCs

  • Continuous Current: 30A
  • Burst Current: 40A
  • Input Voltage: 3S-6S 
  • Weight: 3.26g

 

Bardwell AIO F4 FC

  • 3-6s F4, AIO board with MPU 6000 gyro
  • Superb board layout allowing for easy and clean builds
  • Joshua Bardwell authored manual and selected features, manufactured and backed by RaceDayQuads
  • 4-1 Connector utilizes the full functionality of every 4-1 ESC on the market
  • RX4 pads gather telemetry from each individual ESC
  • Centrally located gyro
  • Betaflight OSD w/240a current sensor
  • Compact 30.5x30.5 board layout
  • 9v filtered power out for VTXs – very strong filtering capability for clean video (the 5v output is also filtered) 
  • Power Out: 2x 5v, 1x 3.3v, 1x VBAT, 1x VTX filtered power (9v), 1x Camera filtered power (9v); 
  • UARTS for FRSKY, SBUS, IBUS, SAT (2 inverted UARTS), TX6 pad added so there is one additional UART for general-purpose use

  • Smart Audio compatibility and Camera Control capability
  • Pre-flashed with BF 3.3.1 - Compatible with CLRACINGF4.hex
  • Programmable LED pin
  • Buzzer pins
  • Built-in Blackbox capability
  • Includes vibration dampeners
  • 7.29g Weight

  

Frsky XM+

  • Dimension:21/5x12x3.5mm(LxWxH)
  • Weight:1.6g
  • Number of Channels: Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC
  • Operating Voltage Range: 3.7~10V
  • Operating Current: 30mA@5V
  • Operating Range: Full range
  • With RSSI output on board:Analog 0~3.3V
  • Firmware Upgradeable
  • Compatibility:FrSky D16 mode​

  

Mach 1 VTX MMCX

  • No plug - direct solder pads for exceptional durability and repair ease
  • Variable 0, 25, 200, 600mw output
  • u.fl connection AND the ability to solder on your own antenna
  • LED Display shows Band, Channel, and Power Setting - Easily change channels in seconds!
  • 7v-24v Direct Input with onboard filtering
  • SMA pigtail - 2.5" long
  • 40CH standard channel output
  • You are still able to use onboard Betaflight OSDs to change PIDs, even though this VTX does not have a Smart Port 
  • This VTX does not have Smart Audio
  • Tested to work on 600mw with NO pigtail for 1 hour - see the video proof here!
  • Compact 28x20x8mm size

FPV REGULATORY NOTICE

The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your areaIt is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. RDQ cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

  

You recently viewed

Clear recently viewed
x