Rush FPV Rush Blade F722 / Rush Blade Super / Rush Tank Ultimate II 3-6S 30x30 Stack/Combo w/ Power Filter Board (F7 FC / 32Bit 60A 4in1 ESC / 25-800mW VTX)

Coming Soon
In Stock
Pre Order
Free Delivery on U.S.A. Orders $50 or more
Add to Wishlist

The RUSH BLADE F722 Stack for analog by RUSHFPV features the RUSH TANK II 5.8GHz VTX, RUSH BLADE F722 Flight Controller, RUSH BLADE 60A 3-6S BLHeli_32 4-in-1 ESC (Super Edition), and the RUSH Power Filter Board (PFB), which can handle up to 6S input voltage and push your FPV racer to the max.

Check out all our 30x30 FCs and our Rush FPV Products.


  • Item Name: Rush Tank II
  • Input Voltage: 7-36V DC
  • Output Voltage: 5V/1A
  • 12V Input Current: 40mA@Pitmode, 95mA@25mW, 185mA@200mW, 250mA@500mW, 380mA@800mW
  • Channels: 48CH RaceBand / LowRace
  • Power: PIT/25/200/500/800 mW
  • Audio: Support audio input
  • Dimensions: 36*36*4.5 mm
  • Weight: 6.8g(including cable)
RUSHFPV RUSH BLADE F722 Flight Controller For Analog
  • MCU: 216MHz
  • GYRO: MPU6000
  • OSD: Onboard OSD
  • Input Voltage: 3-8S
  • BEC: 5V/5A
  • Mounting Holes: 30.5mm x 30.5mm
  • Firmware: betaflight_4.2.0_RUSHFC_8f2d21460

RUSHFPV RUSH BLADE 60A 3-6S BLHeli_32 4-in-1 ESC - Super Edition

  • Rated Current: 60A
  • Peak Current:80A
  • Input Voltage:3-6SLipo
  • MCU:F350 168MHz
  • PWM FREQ:96K
  • LED Color: Pink
  • Weight:16.5g
  • Dimension:45*36.5*7.5mm

RUSH PFB Power Filter Board

The 4 in 1 ESC can not achieve complete filtering due to its compact structure and high power. Excessive voltage peaks can cause interference to other components. Current surges generated during crashes can also have a strong impact on the MOSFET's and the power supply and can cause damage.

The RUSH PFB is small in size and can be installed at the tail of the ESC as a supplementary device for the filter. It is equipped with two 35V 330uF high-speed solid capacitors, and the parallel ESR is very low 5 m0 (TEST FREQ @10KHz)! It has a good filtering effect on high-frequency interference generated by ESC.

There are 3 high-power TVS diodes on board, which can cut voltage peaks at ns speeds, and absorb high-voltage surges caused by collisions of the propeller during a crash in time to protect the field-effect tube and other components from the surge. We recommend installing it in a high-power 6S brushless system.


1x  RushFPV Rush Blade F722 / Rush Blade Sport 4in1 ESC / Rush Tank Ultimate II 3-6S 30x30 Stack/Combo w/ Power Filter Board (F7 FC, 32Bit 50A ESC, 25-800mW VTX)