SkyStarsRC Fly Stack H7 3-6S 30x30 Stack/Combo (H7 FC / KO60 32Bit 60A 4in1 ESC) - Choose Your Option
The SkyStars Fly Stack features an H743 Single or Dual Gyro HD Flight Controller and a KO60 BLHeli_32 4-in-1 ESC with a 30x30 mounting pattern.
Check out our other 30x30 Stacks, and our SkystarsRC collection!
SkyStars H743 HD Flight Controller
- Input Voltage: 3-6S LiPo
- MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash
- Gyro: BMI270 single or dual
- Baro: BMP280
- OSD: Betaflight OSD
- UARTs: 8 Sets
- 8x PWM outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- USB Type-C(USB2.0)
- 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
- 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
- Dual Camera Inputs switch
- VTX 10V/Vbat filtered power ON/OFF switch
- DJI FPV OSD is supported by any spare UART
- Vbat Input: 7~25V (2~6S LiPo)
- BEC: 5V 2A Continuous (Max 3A)
- LDO 3.3V: Max 250mA
- Firmware: Betaflight - SKYSTARSH7HD
- Mounting: 30.5 x 30.5mm
- Dimensions: 39.5 x 39.5 x 7.8 mm
- Weight: 10.1g
SkyStars KO60 60A BLHeli_32 4-in-1 ESC - 30x30
- Continuous Current: 60A x4
- Burst Current: 80A x4
- Supports 4-6S battery
- Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
- PWM: up to 128k
- ESC telemetry Supported
- No output BEC
- BLHeli_32 firmware
- Dimensions: 41x46
- Weight: 13.8g
- Mounting holes: 30x30 M3
Includes
- 1x SkyStarsRC Fly Stack H7 3-6S 30x30 Stack/Combo (H7 FC, KO60 32-Bit 60A 4-1 ESC) - Single or Dual Gyro