ViFly Store Safe Smart 2-6S LiPo Discharger - XT30 or XT60

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $80 or more
Add to Wishlist

Intelligently Discharging LiPo Battery to Storage Voltage
Never keep your battery at the full voltage considering the safety issue and battery life. VIFLY StoreSafe would be the best solution to discharge and maintain your lipo batteries. With the advanced algorithm and built-in temperature sensor, VIFLY StoreSafe lipo battery discharger can intelligently adjust the discharge speed according to the battery voltage and unit temperature. It ensures the highest discharge rate in an appropriate temperature range.

Heatsink to Cool Down the Discharger
In addition to the built-in temperature sensor to control the unit temp, the heatsink would effectively dissipate the heat to prevent the discharger from overheating.
Automatically Identity 2S to 6S Batteries
VIFLY StoreSafe lipo discharger can be compatible with 2S to 6S batteries. When plug in, VIFLY StoreSafe would recognize the battery type automatically, no need to do any extra setting to select different battery types, so simple and convenient.

Easy-to-use, Plug-in and Leave it Alone
The StoreSafe will stop discharging when your battery reaches storage voltage and then goes into an ultra-low leakage current so the unit can be left for long time without over-discharging the battery. Just plug in and leave it alone.

Be sure to check out our tools & building supplies!


  • Up to 1 Watt discharge
  • Auto-Detect 2-6S LiPo
  • Built in Heatsink
  • Discharges batteries to 3.85V/Cell


  • Working Voltage 7.9 - 26V (2S-6S)
  • Discharging Power 1W
  • Turn-off Current < 10uA
  • Storage Voltage 3.85V±0.08V / cell
  • Connector XT60 / XT30
  • Weight 8g(XT60) / 5g(XT30)
  • Size: 37x16x10 mm(XT60) / 32x15x10mm(XT30)


  • 1x ViFLy Store Safe Smart 2-6S LiPo Discharger - XT30 or XT60


  1.  XT60/XT30 Input
  2.  Red LED
  3.  Blue LED
  4.  Green LED
    StoreSafe would recognize the battery type automatically and indicate it with different LED lights.

LED Indication

Green LED

Blue LED


Battery Type













Note: When the LED status does not match the above table, please stop using StoreSafe immediately.


Before using StoreSafe, please make sure that the voltage of each battery cell is higher than 3.95V.

After plugging in the battery, the LED that indicates the status will flash for about 5 seconds and then enter the discharging state. If the LED status not indicates correctly, please disconnect the battery immediately.

The StoreSafe will stop discharging when your battery reaches storage voltage (3.85V±0.08V / cell) and then goes into an ultra-low