Drone Help Forum - RaceDayQuads Forum

Forums
Tech Help & Problem Solving

Latest Topics

Can't make BetaFlight OSD appear on my goggles

HELP, as the title say i cant see the betaflight OSD menu over Smartaudio,i set throttle to cente...

1
Mobula 6 HD FPV feed issue

This is my first ever drone, I feel so near to having it set up. I have the Rx all set, it flies(...

7
DJI Binding is taking too long

DJI controller has Binding Issue at Power Up to the DJI Air Unit / Receiver for my Titan XL5, ove...

1
STRIX ESC Rocket 65A connection question

Hi, can someone let me know for what the 4 round connectors are c2k c2d Vcc and GNDI cant find a ...

4
Burning up cameras in my quad. Please help!

I have recently entered the FPV hobby by purchasing the ‘XILO 5" Freestyle Beginner Drone Bundle’...

5
Odd "hop and stop" issue on take off

Hopefully the video attachment worked.So, I updated the BetaFlight from 4.2.2 to 4.2.4 this morni...

10
A beginner question about AirMode

I’m a beginner and I have been flying tinyhawk 2 and freestyle. I have a new HGLRC Arrow 3 and wh...

13
Tinyhawk2 RX LOSS at my wits' end.

I've had this Tinyhawk 2 and a Tinyhawk Freestyle 2 for months and have been flying them in D16 a...

7
Trying and failing to upgrade DJI HD goggle power setting.

Anybody know of a legit tech service where I can send the DJI HD goggles to get the FCC 700mw pow...

1
RunCam Hybrid stopped recording, can't see Betaflight OSD

Hello all! New here, fairly new to drones. Bought a RTF drone a few months back and after crashin...

4
Fastening GoPro to Cinewhoop

New to FPV and looking to attach my gopro. It doesn't seem like using the curved adhesive mount t...

3
Crossfire Tracer problem

I'm completely new to crossfire and TBS in general. Setup was super easy and binding worked fine....

2
Quad "dethrolls" when armed

As soon as I armed my quad, it went into the air about a foot then violently rolled right until c...

6
Noob question, locating an EFC short circuit

Greetings, The issue happened after putting in new motors and tuning to BF 4.2, I'm currently usi...

5
My soldering okay?

1 2

Hi Guys,This is my first attempt at tinning a ESC board, before proceeding to add the XT 60 and m...

28
RunCam works to goggles until transmitter is turned on

I have a RunCam, separate VTX, inexpensive goggles and Taranis x7. Camera works fine and viewable...

1
matek f405, bardwell 4in1, r9mm build issues

r9mm bound to r9 in x9d + 2019. flex firmware on both (solid green light on r9mm) FC programmed(s...

8
quad not receiving signal or radio not transmitting?

i crashed my mobula6, did a flip (turtle mode) and found i wasn't able to fly. so i had to track ...

3
JBF7 takes over 30 seconds to get final beeps

In what I originally thought was a fried 5v regulator or non calibrated ESC's, I left it sitting ...

9
Motors violently shaking

I'm building my first 5" quad and I'm having a bad problem where the motors upon arming of the qu...

3
fine ill suck it up and ask. (radiolink at9s and mobula 6)

hello I'm basically new to fpv and all the wonders there in..... 😎...mmmm 😆mmmm😜bwwaahhhaa🤣! h...

10
Trouble with updating Taranis X9D plus ( the old one, pre 2019 and "SE" version)

I have had the same X9D plus for many years and the only time I've had any issue was yesterday wh...

2
Powering tiny whoop camera for long period of time?

Hey, so I have a project where I want to use an fpv camera and put it in a model plane that will ...

2
TBS source one RTF. How do you change the Vtx channel?

Hello! I bought a TBS source one RTF from TBS's website and can not figure out how I'm supposed t...

3
Best brushless whoop

What is the best brushless indoor whoop?

7
Mobula 6

I am having problems with my mobula 6 vtx. After I fly for maybe 3 to 6 minutes the video starts ...

3
Which fpv drone and controller for a beginner

1 2

Dear allI use inspire one and phantom series of DJI a lot. but i like to switch to FPV drones. I ...

30
Hobbywing G3 stack with RXSR ,no telemetry

I had no problem soldering up everything with air unit and RXSR and betaflight is seeing stick mo...

12
Next clearance sale?

Hey, I missed something I wanted from the clearance sale. When will the next one be and when will...

4
First drone, bad motor or esc

So I've been having issues with my first drone build. I've already had to replace my FC because i...

11
Video issue - Meteor65

I have a Meteor65 BNF that I have flown it a fair amount over the past few months without problem...

3
Help with Fly Sky FS-i6 No range issue

I bought a Eachine Wizard 220 and it came with the fly sky FS-i6 transmitter and Flysky FS-A8S re...

8
PDB with OSD?? Anyone? Anyone?

As I was cleaning up the pdb on my (wizard220) getting it ready for a new FC, and maybe new LEDs....

3
lost video

fresh rebuild.everything was working fine then I tried to switch power level from 25 to 200,as so...

9
AKK FX3 Ultimate Mini button inop

I got one of these a few months ago and just got to installing it on my 3” build. It seems to wor...

7
GEPRC Thinking P16 hd not working right

I recently bought the Thinking P16 hd to fly with the dji fpv goggles in hd indors. My last build...

1
Thunking P16 hd not working right

I recently bought the Thinking P16 hd to fly with the dji fpv goggles in hd indors. My last build...

1
Mach 3 OSD

Is there a way to reposition the channel and power info that shows up on my fpv goggles from the ...

2
Fpv Camera size

Its my first time building a quad and i chose the martian V frame as it was the only one in stock...

2
Mobula7 - in the water :-(

I got a Mobula7 to learn to fly and I loved it. The first time I tried it I thought I'd never lea...

10