GEPRC BNF CineLog35 V2 HD 6S 3.5" Cinewhoop w/ DJI O3 Air Unit & Micro Cam - Choose Your Receiver (GPS)
New design with reinforced carbon plate, hollowed-out frame, noise reduction tech & enhanced safety. GEP F722-45A AIO V2 flight controller & SPEEDX2 2105.5 motor w/ HQ DT90 prop. Through the propeller guard for memory & USB access to O3 Air Unit. XT60E1-M plug & carbon plate design for power cable. 7075 aluminum parts for battery tie-down. Pre-tuned 3.5" HD cinematic FPV quad w/ delicate flight feel & pre-installed M8U GPS.
- New appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent.
- Adopts the GEP F722-45A AIO V2 high performance flight controller.
- For O3 camera design independent under hanging shock absorption gimbal, to solve the camera IMU resonance issues, to achieve the optimal anti-shake effect.
- SPEEDX2 2105.5 motor with HQ DT90 propeller, stable power output, and smooth flight feel.
- Through the Propeller Guard to access the memory card and USB ports to O3 Air Unit for easy data reading
- Power cable using XT60E1-M plug and carbon plate integrated design, convenient application.
- Battery installation method using a tie with 7075 aluminum parts fixed, solid and stable.
- Carefully tuned 3.5-inch HD cinematic FPV quad with flexible and delicate flight feeling.
- Pre-Installed with a M8U GPS
- Model: Cinelog35 V2 HD O3
- Frame: GEP-CL35 V2
- Wheelbase: 142mm
- Gimbal plate: 2.0mm
- Top plate: 3.5mm
- Bottom plate: 1.5mm
- FC system: GEP-F722-45A AIO V2
- MCU: STM32F722RET6
- Gyro: ICM 42688-P
- OSD: Betaflight OSD w/AT7456E chip
- ESC: 8Bit 45A
- VTX: O3 Air Unit
- Camera: DJI O3
- Antenna: 5.8G & 2.4G
- Motor: SPEEDX2 2105.5-2150KV (6S)
- Propeller: HQProp D-T90MM
- GPS: GEP-M8U
- Weight: 285.8g
- Receiver: PNP / ELRS 2.4GHz / CRSF
- Recommended battery: LiPo 1050mah-1300mah
- Flight time: 5′00″ - 8′ 30″
- 1x GEPRC BNF CineLog35 V2 HD 6S 3.5" Cinewhoop w/ DJI O3 Air Unit & Micro Cam - Choose Your Receiver (GPS)
- 1x L-shaped screwdriver (1.5mm)
- 1x Naked GoPro Mounting Base
- 1x L-shaped screwdriver (2mm)
- 1x L-shaped screwdriver (3mm)
- 2x HQProp D-T90MM（2 pairs）
- 2x M20x250mm battery strap
- 1x Antenna fixed tube (pair)
- 1x Antenna Mounting Base
- 1x GoPro Mounting Base
- 2x Battery Silicone Pads
- 1x Plastic Tweezers
- 1x Hardware Set
- 1x M5 wrench
- 1x Keychain