Products

This antenna is a perfect replacement for the ERLS or TBS Tracer receivers.  Check out the rest of our ELRS accessories, as well as the rest of our...

This antenna is a perfect replacement for the ERLS or TBS Tracer receivers.  Check out the rest of our ELRS accessories, as well as the rest of our...

All batteries must be shipped by a ground shipping method. Spare battery for the HappyModel Moblite7 Whoop. Check out the entire RDQ Series of LiPo...

Get ready to experience the thrill of FPV racing with the HappyModel Bassline FPV Drone Frame Kit! This high-quality frame kit is designed for maxi...

Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be the best choice in the whoo...

Introducing the HappyModel Bassline 2S Micro FPV Racer Drone! This high-performance drone is perfect for FPV racing and freestyle flying. With its ...

The Crux 35 is an ultra-lightweight 3.5Inch FPV freestyle and racing drone, the weight of the whole drone is only 87g for the analog version and 10...

Introducing the Moblite7 Ultralight FPV Brushless Whoop! Made in collaboration with FPV pilot "Mr. Shutterbug," this whoop is one of the lightest 7...

The Happymodel Moblite 7 Walksnail Avatar Whoop is a 75mm HD brushless whoop weighing just 33.5 grams. It features the Walksnail Avatar 1S Mini VTX...

The Happymodel Moblite7 HDZero Whoop is a 75mm HD brushless whoop weighing just 29.5 grams. It features the HDZero Whoop Lite VTX and Nano Camera a...

Equipped with an ExpressLRS built-in SPI receiver, you'll never have to worry about range when whooping!  This version of the Mobula6 also has anot...

All product containing lithium batteries must be shipped by a ground shipping method. Please be aware Betaflight 4.3.1 firmware has a bug, Please d...

The Happymodel Mobula 6 HDZero 1S Whoop is the very first 65mm HD brushless whoop in the world, weighing less than 23.5 grams! The Mobula6 is a sm...

Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with an amazing DJI O3 Air Unit and Mic...

Please note that this version is a kit and AP! does NOT come with an O3 air unit, O3 camera and SanDisk Card. Experience powerful performance with ...

Spare replacement Flight Controller for the Happymodel Mobula 6, and an all around incredible little TRUE AIO for any 1S brushless build!  Check ou...

This is the FrSky RX equipped version.The CrazyBee series just got a little crazier! These AIO whoop style FCs are meant as replacements and upgrad...

The world's first AIO 5in1 whoop flight controller with built-in ExpressLRS receiver is coming out now. This F4 flight controller has a built-in 5A...

An F405 chip FC with built-in Serial ELRS receiver, 4in1 12A ESC, and 8Mbp black box. Optimized layout, supports 1-2S Lipo/LiHV. Perfec...

Equip your 2-4S drone with the HappyModel CrazyF411 F4 Flight Controller. Enjoy flying with its 20A 8Bit 4in1 ESC and ELRS 2.4GHz receiver fe...

HappyModel continues to impress with yet another fantastic AIO for whoop applications! Check out the HappyModel CrossF4 1-2S AIO Whoop Flight...

Replacement part for the HappyModel Crux3 Check out the HappyModel Crux3 Quad and Accessories Collection. Specifications Image Sensor: 1/3" CMOS S...

Replacement part for the HappyModel Crux3 Check out the HappyModel Crux3 Quad and Accessories Collection. Includes 1x HappyModel Crux 3 Canopy - ...

This is a replacement frame for the Crux 35 Frame. Check out our other Crux35 accessories, as well as the rest of our HappyModel selection! Specifi...

This is a replacement bottom plate for the Crux35 and Crux35 HD frames. Check out our other Crux35 accessories, as well as our entire Happymodel se...

The CruxF405HD ELRS AIO flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-installed...

This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller ha...

This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller ha...

Upgrade your whoop with a solid VTX with a DVR built in. Pair this with one of our whoop flight controllers, and check out the rest of our Happymod...

Another Express LRS receiver but this time, it's PWM capable! The Happymodel ExpressLRS PWM Kit includes a 6CH EPW6 2.4GHz Receiver with two antenn...

The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module.Max output up to 1000mw, reserved Cooling Fan and RGB LED module. T...

This Slim Pro TX module is designed by Happymodel and based on the open-source  ExpressLRS which is a very popular low latency and high packet rate...

HappyModel ES900 DUAL RX ELRS Diversity Receiver 915MHz / 868MHz Built-in TCXO for RC Airplane FPV Long Range Drones.  Check out the rest of our EL...

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This receiver will let you connect to any Express...

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This kit from Happymodel is a great combo to star...

Great motor for any whoop and a perfect replacement part for the Happymodel Mobula 6 HD. We also carry these motors in multiple KV options. Check o...

Great motor for any whoop and a perfect replacement part for the Happymodel Mobula 6 HD. We also carry these motors in multiple KV options. Check o...

The Happymodel EX1002 is a 1002 brushless motor with 20000KV. This is a replacement motor for the Happymodel 1S HDZero Whoop. Check out the rest of...

The Happymodel EX 1103 11000KV are the direct replacement motors for the Bassline 2S, so RDQ has you covered! It will also work great one any 2" To...

HappyModel has been making micro motors for a long time, and their experience shows in this EX line of motors. Check out our other 1404 motors, and...

Spare replacement bell for Happymodel EX1102 motors. Check out the rest of our motor parts & accessories and our Happymodel selection! Includes...

This set of 4 EX 1102 13500 Kv brushless motors with 1.5mm shaft are replacements motor for the Happymodel Mobula7 HD brushless cinewhoop, but can ...

This set of 4 EX 1102 9000 Kv brushless motors with 1.5mm shaft are replacements motor for the Happymodel Mobula7 HD brushless cinewhoop, but can b...

4 Hole versionIndividual spare replacement motors for the HappyModel Larva X & SailFly. Check out all our micro motors and our HappyModel gear!...

Can be used for any build and a perfect replacement part for the HappyModel Crux3 Check out the our other motors as well as our HappyModel Crux3 Qu...

Considered by many to be the best FlySky compatible receiver out there for quads, the Fli14+ offers dual antennas, telemetry, and RSSI over CH14. I...

Notes: The ELRS RX and OPENVTX share the same Power input and GND pads, so if you use both ELRS RX and VTX then you just need to solder one Power i...

Gemfan's new 1.6" (40mm) bi-blades are a direct replacement for the HappyModel Mobeetle or the Happymodel 1S Mobula 7 but also work well on all qua...