NewBeeDrone Nitro Nectar Gold 300mAh 1S HV LiPo Battery with GNB27 (4 Battery)
All batteries must be shipped with a ground shipping method.
We are excited to introduce the Nitro Nectar Gold Series HV Lipo Battery Series! They use a different battery packaging technology that provides a better discharging rate for those who like to push the limit! We tested these batteries with our powerhouse 1S craft, the AcroBee BeeBrain BL BNF and they are built to keep up with the demand of raw thrust! After 3 months testing, we are now ready to bring them to the market for whoop pilots across the world!
Lightweight, durable and plenty of power to bring home the Gold!
If you want to run a larger 1s battery, you can solder two pigtails to your drone in parallel and run two of these batteries at once for 600mAh 1s! Please be careful when soldering two pigtails and check your work.
NOTE: These packs are designed to deliver a major amount of power! With the discharge rate that gives these packs such power, you will feel pack sag much later than normal packs. We suggest setting the low voltage reading to 3.5v per cell and bringing it in to land at 3.3v per cell. You are able to fly below 3.3v but that may result in battery degradation.
Click here to grab some GNB27 pigtails to install on your drone or make charging harnesses.
Check out the full selection of our 2s Batteries!
Specifications:
- Cell count: 1
- Nominal voltage: 4.35V
- Max voltage: 4.35V per cell
- Capacity: 300mah
- Continuous discharge rating: 40C
- Max discharge rating: 80C
- Dimensions: 62mm x 10.5mm x 6.5mm
- Weight: 9.19g (+/-1%)
- Watt hours: 1.14 Wh
- Wire length: 50mm