FPV Cycle 13mm 5000Kv Micro Motor - 2mm Shaft
These are a little beefier version of the original 1303 FPV Cycle micro motors, they offer a smoother mid throttle and a little more overall power.
- 3" twin (3018) or triblade (3016) on 2S - 3S
- 2"-2.5" any blades on 3S - 4S
Extended use cases
- 3" with 4S is fine but tuning will be a PITA.
- 4" (4023 twin blade) with 2S or 3S is okay but again, difficult to tune.
- ~6.5g with long, ~85mm wires
- Mounting: 9mm diameter, 4 hole, M2
- 27awg silicone motor wire
- 2mm press fit prop shaft that’s 5mm tall
- 2mm internal shaft all the way through
- T-mount prop mounting also
- 5mm size bearings
- C-clip bell bottom and no C-clip n top
- 0.15mm laminations
- 7075 aluminum
- Single piece bell design
- 1x FPV Cycle 13mm 5000Kv Micro Motor - 2mm Shaft