Skip to content

(PRE-ORDER) HappyModel BNF 2024 V1 Mobula6 ELRS V3.0 65mm Ultra Light Brushless Analog Whoop - ELRS 2.4GHz

Original price $114.99 - Original price $114.99
Original price
$114.99 - $114.99
Current price $114.99
Pre Order
In Stock
Coming Soon
Free Delivery on U.S.A. Orders $99 or more

Add To Wishlist

Pre-orders shipping ASAP!

The Happymodel Mobula6 2024 1S 65mm Ultra Light Micro FPV 1S Whoop comes equipped with a lightweight AIO flight controller and 2.4Ghz ELRS receiver. The 2024 V3 is Ready to Rip!

Check out our other pre-built quads, as well as the rest of our HappyModel selection!


  • AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx
  • Super light 1S 65mm Brushless whoop only 17.7g
  • Equipment with the lightest brushless motors-SE0702 only 1.46gram
  • FX17-B 1/3 CMOS 800TVL Camera awesome footage
  • Smooth and powerful
  • Compatible for 1S Lipo/LIHV


  • Wheelbase: 65mm
  • Size: 81mm x 81mm x 37mm
  • Weight: 17.7g
  • Option:
    -V1 version with SuperX ELRS V1.0 AIO
    -V2 version with SuperX ELRS V2.0 AIO
    The only difference is v2.0 AIO FC comes with motor plug but V1.0 AIO FC is no motor plug.


  • Mode: SE0702 KV28000
  • Configu-ration: 9N12P
  • Stator Diamter: 7mm
  • Stator Length: 2mm
  • Shaft Diameter: Φ1mm
  • Motor Dimension(Dia.xLen): Φ9.5mm x 14mm
  • Weight(g): 1.46g
  • No.of Cells(Lipo): 1S only


  • Materials: PC
  • Inch: 31mm
  • Pitch: 0.8 in
  • Weight: 0.21g
  • Mount hole diameter:  1mm


  • SuperX ELRS AIO 5-IN-1 Flight controller
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
  • Sensor:BMI270(SPI connection)
  • Mount hole size: 25.5mm x 25.5mm
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
  • Built-in UART ExpressLRS v3.0.0
  • Built-in voltage meter sensor , voltage meter scale 110
  • Built-in current meter sensor , current meter scale 1175
  • Power supply: 1S LiPo/LiPo HV
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: Bluejay v0.19.2
  • Default protocol: DSHOT300
  • Recommend ESC Startup power value to min1100/max1200

Onboard Serial ExpressLRS receiver

  • Packet Rate option: 50Hz/150Hz/250Hz/500Hz
  • ExpressLRS Firmware version: V3.0
  • RF Frequency: 2.4GHz
  • Antenna : Enameled copper wire antenna
  • Telemetry output Power: <12dBm
  • Receiver protocol: Serial_based CRSF
  • Compatible with ExpressLRS V3.x.x TX Module
  • Could flash single ELRS receiver firmware by Wifi
  • ExpressLRS firmware target: ExpressLRS firmware target:
  • HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher)
  • Available from Expresslrs version 3.4.0 RC2

Onboard VTX

  • Firmware version: OPENVTX
  • PIT Mode support
  • Channels:40ch
  • Transmitting Power: 0/RCE/25mw/100mw/400mw
  • Power supply: DC 5V
  • Current (5v): <650ma (400mw)
  • Antenna connector: U.FL

FX17-B Camera

  • Model: FX17-B
  • Image Sensor: 1/3″ CMOS
  • Horizontal Resolution: 800TVL
  • FOV 150°
  • Signal System: NTSC
  • Net Weight: 1.5g
  • Dimensions: L14mm x W14mm x H13mm
HappyModel BNF 2024 V1 Mobula6 ELRS V3.0 65mm Ultra Light Brushless Analog Whoop - ELRS 2.4GHz


  • 1x HappyModel BNF 2024 V1 Mobula6 ELRS V3.0 65mm Ultra Light Brushless Analog Whoop - ELRS 2.4GHz +Canopy
  • 1x Option1: SuperX ELRS AIO 5-IN-1 Flight controller V1.0
  • or 1x Option2: SuperX ELRS AIO 5-IN-1 Flight controller V2.0
  • 4x SE0702 KV28000 brushless motor
  • 1x Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw)
  • 1x FX17-B 1/3 CMOS 800TVL camera NTSC 4:3
  • 1x Onboard 5.8G 25mw~400mw VTX
  • 1x Spare canopy
  • 1x Propeller disassemble tool
  • 1x Screw driver