The Bardwell F4 has been redesigned with V2 of the extremely popular Flight Controller. V2's 9v regulator and OSD circuit have been completely rede...
View full details
The Riot Control Flight Control Board was designed by the Rotor Riot pilots around components that have proven performance. STEP-BY-STEP Guide [CL...
View full details
For a new generation of toothpick drone- New AIO Brushless FC can handle 20A continuous current(25A burst), which is the first 20A All-in-one FC on...
View full details
The next generation of XRotor Micro FC from Hobbywing features faster running speeds thanks to a STM32F405 MCU and smoother flight thanks to a high...
View full details
TransTEC F7 HD is a FC designed purely for HD flight, keeping all that you need for FPV, and getting rid of the unnecessary. The MPU6000 gyro makes...
View full details
Replacement Flight Controller for the Emax Mini Magnum Tower.
The CLRacing F7 Dual revision 2.1 has a notch cut out for tight builds or high camera tilt, as well as being able to power the CLRacing Bluetooth M...
View full details
TransTEC F7 is a FC designed purely for flight, keeping all that you need for FPV, and getting rid of the unnecessary. The MPU6000 gyro makes for ...
View full details
The T-Motor F7 Flight Controller now comes in a version meant specifically for the DJI Digital FPV System! Including a plug for your Air Unit and a...
View full details
The new layout 12A 2-4S F4 AIO FC(BLHeli_S) is customized for Toothpick Drone. WIth the real holes, side-mount USB and all solder pads of the edge ...
View full details
Be sure to choose the right RX version for you radio. The CrazyBee series just got a little crazier! These AIO whoop style FCs are meant as replace...
View full details
The team over at BrainFPV are proud to introduce RADIX, the smartest, most innovative line of drone electronics BrainFPV has ever developed. The RA...
View full details
Spare replacement EMAX Tiny Hawk S AIO with D8/D16 receiver and 25 MW VTX. 1-2s LiPo operation.Check out all our TinyHawk parts, and EMAX gear! Com...
View full details
The latest and greatest AIO FC from Matek is here and bringing new features to the table that pushes forward our hobby to a new extent! Check out ...
View full details
The F765-WING is an incredibly feature rich wing flight controller that supports Betaflight, iNav and ArduPilot. If you love connecting all sorts o...
View full details
The latest version of the CLF4S is here! Version 1.6 will have voltage scale change from 110 to 160 in the battery tab, and user selectable BEC is ...
View full details
The Lumenier LUX F7 Ultimate Flight Controller is the next generation of the popular Lumenier LUX flight controller lineup. It uses a powerful F7 p...
View full details
3rd (Latest) VersionThis the long awaited 4S capable AIO FC from BetaFPV. Light weight (5.6g) and easy installation make this a great choice for lo...
View full details
Featuring a fast F7 processor and dual gyros, this is the cutting edge of CLRacing flight controller tech! Check out all our 30x30 Flight Controll...
View full details
The BrainFPV team have squeezed your favorite flight controller down to 20x20. Everything you love about RADIX just got smaller. ...and cuter.Pairs...
View full details
The FlightOne Revolt OSD Lite flight controller is one of the most advanced, performance-driven, flight controllers ever designed. The RevoltOSD us...
View full details
Note: The STM32F722 generates a decent amount of heat, please leave at least 5mm either side of the FC in your stack to allow adequate air circulat...
View full details
The next generation of BeeBrain controllers is here! A new board featuring an F4 CPU, 1-25mw VTX, FrSky compatible Receiver, Active-Braking, all on...
View full details
Replacement flight controller for the Diatone Mamba Power Tower Check out our huge selection of flight controllers and all our Diatone gear! Speci...
View full details
HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to ...
View full details
T-Motor's F4 Flight Controller designed for plug and play compatibility with the DJI Digital FPV system has arrived! Logical layout, and it's also ...
View full details
Note: The STM32F722 generates a decent amount of heat, please leave at least 5mm either side of the FC in your stack to allow adequate air circulat...
View full details
Replacement FC for the SucceX Micro F4 Flight Tower System in the CineBee 75HD. See the rest of our CineBee Parts & Accessories, our iFlight Pr...
View full details
The SucceX-D Mini F7 Flight Controller is designed to work seamlessly with DJI’s new HD FPV system. To make things as simple as possible, we have ...
View full details
The FlightOne RevoltOSD flight controller is the most advanced, performance driven, flight controller ever designed. The Revolt uses a powerful F40...
View full details
The new F7 board from Matek is loaded with a 32K Gyro, Baro, BFOSD and SD card slot. With the ribbon connector to the Matek FCHUB-VTX or FCHUB-6S,...
View full details
T-Motor's first F7 Flight Controller has arrived! Logical layout, designed to work seamlessly with the T-Motor F45 and F55 ESC. Check out all our 3...
View full details
Looking for a budget FC for your new FPV Wing? Look no further, cause Matek has you covered with this new budget version of their industry leading ...
View full details
The Matek F405-Wing FC is the industry's leading Flight Controller for FPV Wings. Check out it's specs below! FC Specifications MCU: 168MHz STM32F...
View full details
The DalRC F405 is the first All In One Flight Controller made by DALRC. Known for their DALRC Engine ESC, they've also been successful with their F...
View full details
Immense power in a small package! Matek has added another member to their line of mini 20x20mm flight controllers; the F722-Mini with dual gyros, V...
View full details
CLRacing gives you the option of a single MPU6000 gyro if you prefer it over their dual gyro version of the CLRacing F7 V2. The only difference bet...
View full details
The new F405 board from Matek is packed with a 32K Gyro, Baro, BFOSD and SD card slot. Using the ribbon connector with the Matek FCHUB-VTX or FCHUB...
View full details
NameLessRC has come up with a pretty cool little AIO here. Great layout, classic components, 2-4S capable, and solid build quality. Check out t...
View full details
1. STM32F405 @168mhz 2. Direct 2-6S input. 3. MPU6000 gyro 4. Filtered 5V and 9V. 5. Direct stack on Frsky xm+ rx 6. Build_in betaflight OSD. 7....
View full details
This FC was designed to pair perfectly with the DALRC Engine 4n1 ESC! DALRC F405 Flight Controller adopted STM32F405 high quality MCU, MPU6000 gyro...
View full details
Matek's follow up to their AIO board is here and looking better than ever! Check out our other Matek products! FC Specifications MCU: 168MHz STM3...
View full details
Replacement flight controller for the Diatone Mamba Power Tower F4M&F25 Mamba F405 Mini Mk 2 FC: Item name: F405 mini Betaflight Flight Co...
View full details
The Aikon flight controller is a new generation flight controller designed specifically to work with our Aikon 4-in-1 ESCs. We've packed all the gr...
View full details
The newest release from Matek which is designed to bring the high-functioning F7 in a package meant for a Fixed Wing craft! FC Specifications MC...
View full details
With the Speedy Bee F4 AIO FC, you no longer need to bring a laptop or tablet with you to tune or change settings in the field. They've integrated ...
View full details
The HGLRC Zeus is the Asgard AIO of 2" and 3" quads! Where 2" and 3" builds can be tough to fit everything, that is not a problem for the Zeus whic...
View full details