Video Transmitters & Antennas

Connect your SMA antennas to your DJI goggles and air units with these adapters. Check out all our pigtails, adapters and connectors! Includes 2x ...

V3 now includes a voltage display, power switch and additional solder pads.This analog fat shark module adapter fits on the side of your DJI Digita...

Used to be everyone had a pile of these laying around. If you're flying a linear dipole on your whoop and wondering where your old rubber ducky fle...

This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from a...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 3S batteries! Note: Please chec...

A high quality MMCX to SMA pigtail. Available in different lengths.  Be sure to check out our tools & building supplies! Specifications Connec...

This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters & connectors! Includes 1x ...

A simple yet useful XT30 (Male) to XT60 (Female) adapter without a cable. Check out our other tools and building supplies! Includes  1x XT30 to XT...

Lightweight linear U.FL dipole antenna, great for racing! Check out the rest of our VTX Antennas! Specifications Polarity: Linear Connector: U.FL ...

A simple yet useful XT30 (Male) to XT60 (Female) adapter with a 100mm 18AWG cable! Check out our other tools and building supplies! Includes  1x X...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 6S batteries! Note: Please chec...

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! We also have 4 packs in...

A high quality 90° MMCX to SMA pigtail.  Be sure to check out our tools & building supplies! Specifications Connector: MMCX Male to SMA Female...

T antenna tube holders compatible with both the normal and knurled M3 standoffs (not barbell/dogbone). Works perfect with the TBS Immortal T and R9...

Single right angle / 45° degree SMA adapter.  Only one connector is included.  Check out all our pigtails, adapters and connectors! Includes 1x ...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 4S batteries! Note: Please chec...

Typically used to connect a device with female a XT60 plug to a DC power supply, lead acid, SLA, or Pb field battery using Alligator clips. Check o...

A note from GNB: We define this connector's "gender" by plastic not by metal bullet. Female is used on the Drone side while Male is used on the Bat...

A set of 5 surface mount ufl connectors.With a little patience, repairing broken VTX and RX antenna connectors is worth the effort! Check out all o...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 2S batteries!  Note: Please che...

This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze! Check out all our 3D printed accessories! Includes 1x A...

Handy little metal adapters for using M2 screws on boards with M3 holes. Check out all the rest of our hardware! Includes 10x M2 to M3 Brass Adapt...

This XT60 pigtail is ready to be soldered onto your rig!  Check out all our pigtails and connectors as well as tools and building supplies! Include...

MMCX to SMA Adapter Connector Check out all our pigtails, adapters and connectors! Includes 1x MMCX Male to SMA female adapter

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

RX antenna tube holders compatible with both the normal and knurled standoffs.  The antenna tubes are at a 45 degree angle and come in sets of 2.  ...

A special adapter for charging your X9D LiPo Battery. Check out all our pigtails and connectors, as well as our chargers and accessories! Specifica...

Connect your RP-SMA DJI antennas to standard SMA pigtails with these adapters. If you're trying to connect an SMA antenna to the DJI Goggles this w...

This is the PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more power a...

 Micro RX Antenna made for 900MHz Receivers. Check out the rest of  our RC transmitters, modules, and accessories! Specifications Frequency: 868MH...

Lightweight linear 90º MMCX dipole antenna, great for racing!  Check out the rest of our VTX Antennas! Specifications Polarity: Linear Connector: ...

This is the latest PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more ...

XILO AXII antennas bring you the same game-changing performance as the original Lumenier AXII antennas with superb penetration, signal strength, an...

The Lumenier AXII 2 HD is known to be the most versatile and highest performing antenna line for FPV today. Lumenier has been able to improve on th...

The Lumenier AXII is known to be the most versatile and highest performing antenna line for FPV today. Lumenier has been able to improve on the bes...

The Lumenier AXII Patch HD 5.8GHz Antenna offers you the highest performance you can get from a mini patch antenna designed for FPV. The Lumenie...

The Lumenier Duality DUAL-MOX HD 2.4/5.8GHz Dual-Band High-Gain Antenna four-piece bundle is for the DJI FPV Goggles V2. The DUAL-MOX is a linear ...

The Lumenier AXII is known to be the most versatile and highest performing antenna line for FPV today. Lumenier has been able to improve on the bes...

The Lumenier AXII is known to be the most versatile and highest performing antenna line for FPV today. Lumenier has been able to improve on the bes...

The Lumenier AXII 2 HD is known to be the most versatile and highest performing antenna line for FPV today. Lumenier has been able to improve on th...

The Lumenier AXII Duality HD is a dual-band, double antenna specifically designed for the DJI O3 Air Unit. (4 antennas in 1!) Duality provides h...

The TBS Gorilla Top Mount Adapter is designed to sit atop any 4-in-1 ESC featuring a Gorilla mounting pattern. This mount adapter includes 20x20 (M...

Upgrade the DJI Integra with the ORT Helical 3-Turn 5.8GHz Antenna. With a 3-Turn design, it boosts signal strength and extends signal range for FP...

Upgrade the DJI Integra with the ORT Helical 6-Turn 5.8GHz Antenna. With a 6-Turn design, it boosts signal strength and extends signal range for FP...

The EMAX Wyvern Link (Alpha) is a high-performance 100mW VTX built with OpenIPC firmware. Featuring the IMX415 sensor, it delivers crystal-clear 12...

The EMAX Wyvern Link (Alpha) is a high-performance 800mW VTX built with OpenIPC firmware. Featuring the IMX415 sensor, it delivers crystal-clear 12...

Upgrade your DJI Goggles 2 with the Patch G2. Foldable, convenient antenna with excellent performance. Its pivoting PTFE joint provides optimal sig...