Wing Hardware

These 1 meter (39.37") pultruded Carbon Fiber rods are great for reinforcing models.  Use them in the wings, fuselage, or other parts of the model....

These 1 meter (39.37") pultruded Carbon Fiber Tubes are great for reinforcing models.  Use them in the wings, fuselage, or other parts of the model...

These 1 meter (39.37") pultruded Carbon Fiber strips are great for reinforcing models.  Use them in the wings, fuselage, or other parts of the mode...

Quality glossy laminating film cut from a 25" wide roll and sold by the foot. (Max section length is 10ft, for handling)Laminating your foam aircra...

These 1 meter (39.37") pultruded Carbon Fiber Square/Square Tubes are great for reinforcing models.  Use them in the wings, fuselage, or other part...

Bullet connectors for ESC / Motor connection, or wires you want to easily disconnect. Pack of 3, available in multi sizes. Here are some guidelines...

Pair of spare replacement 1.2mm Steel Z-bend push rods. Available in multiple lengths.  Check out the rest of our servos, linkages & accessorie...

These handy little connectors are basically 3 pin XT30s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

Precision molded, inspected and assembled with locked in hinge pin. Flash free, simple to install. Hinges have 6 holes on each side for maximum hol...

These handy little connectors are basically 3 pin XT60s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

Spare replacement wing part. Just a cheap control horn & clip, with zip-tie style clamping plate and clip for push rod end. (rod not included) ...

Nylon 3/4" long with 4 adjustment positions. Includes 2 control horns centered on base, 2 self threading nut plates and (4) 2-56 x 3/8" screws.  Ch...

These handy little connectors are basically 3 pin XT60s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods ar...

Complete assembly for any control linkage. Allows easy removal for on-the-field adjustments. Features 12" long .072 diameter rod with 3/4" 2-56 thr...

Aluminum 16x19mm Wing Motor Mount w/ Screws Check out all of our wing hardware! Includes 1x Aluminum 16x19mm Wing Motor Mount w/ Screws

Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods ar...

Aluminum Bullet Prop Spinner Adapter for M5 to 3.17mm shaft. Check out all of our wing hardware! Includes 1x Aluminum Bullet Prop Spinner Adapter ...

5 piece ball link set, excellent for off-set steering, throttle and servo hook-ups. Ball is threaded for 2-56 nut. Threaded coupler 3/4" with 3/8" ...

E/Z Connectors come complete with 2 each Connector, 4-40 x 1/8 Slotted Screw, black snap washer, and push on steel washer. Works with .072" / 2-56 ...

JR type servo extensions with flat bonded wire. Available in multiple lengths. Wire color may vary as well as the wires being braided vs bonded.We ...