The JHE20B Finder is compatible with all BF and CF flight controls. Just connect to the buzzer interface of the flight controller and it will work....
View full details
A reliable GPS with built in compass, all at a great price! Check out all our GPS modules! Features GPS Module, Dual Module Compass With electro...
View full details
**3.3 VOLTS ONLY - DO NOT USE 5 VOLTS!** We recommend an input voltage of 3.3v. The result may not be immediate, but eventually supplying voltage...
View full details
Introducing the NewBeeDrone M10Q Micro GPS w/ Compass (10th Gen)'s advanced navigation capabilities, featuring wide-range precision GPS/compass tec...
View full details
Diatone Mamba Micro 2A SWITCHABLE BEC 5V/9V for DJI Air Unit! This unit conveniently switches between a 5v and 9v output at 2 Amps! Check out all...
View full details
The MATEKSYS M10Q-5883 supports GNSS (GPS, GLONASS, Galileo, and BeiDou) and thus offers excellent RF sensitivity. The SAM-M10Q uses a multi-conste...
View full details
The iFlight BLITZ M10 GPS w/ Compass provides reliable positional and directional data for your quad. Its advanced compass and GPS module...
View full details
Because the GPS chip is a new 10th generation chip, the flight controller needs to flash firmware 4.29 and above, and the firmware below 4.29 uses ...
View full details
Note: The chip of GOKU GM10 V3 GPS is M10050. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA pr...
View full details
Track how fast your RC vehicle at any time with this small device that pairs with your smartphone! The collected data gets transfered to your P...
View full details
The Vifly Finder 2 is compatible with any flight controller or receiver with buzzer or pwm connection (just about everything) and its internal batt...
View full details
Some drones like DJI models are installed with GPS that only provide you the craft location, with the sound help, you can find your lost drone prec...
View full details
The Matek SAM-M10Q-5883 GNSS is a cutting-edge multi-constellation GNSS module featuring the advanced u-blox SAM-M10Q platform. It offers exception...
View full details
Check out FlyFishRC M8QMC-5883L GPS & Compass Module, which uses ublox 10th generation chip for staple positioning speed. With this quality mad...
View full details![Power Board PDB APD PDB500[X] 50V 500A 30x30](http://cdn.shopify.com/s/files/1/1285/4651/products/APD28_1000x1500_128d6cda-f47d-4eec-9c69-e0caabc3723f_512x512.jpg?v=1649359592)
![APD PDB500[X] 50V 500A 30x30 Power Board PDB](http://cdn.shopify.com/s/files/1/1285/4651/products/APD11_1000x1500_111f760b-c4e1-460a-a96b-608712ef5e98_512x512.jpg?v=1649359479)
The APD PDB500[X] 50V 500A 30x30 Power Board PDB is designed for high voltage and high current applications. They consist of 8 layers of heavy copp...
View full details
The ViFly Finder Mini is a smaller more compact version of the ViFly Finder 2, weighing only 2.7g. This buzzer is perfect for compact builds and us...
View full details
The iFlight 5V/12V Step Down Micro BEC features high-efficiency synchronous rectification and the ability to step down from a wide input voltage ra...
View full details
Compact GPS Module from HGLRC. Check out our GPS selection and all our HGLRC products! Specifications Chip: M8030 Power Supply: 5V Antenna: Ceram...
View full details
Multipurpose buzzer from Flywoo, never lose your quad again. Check out the rest of our Buzzers & Alarms and our Flywoo gear selection! Features...
View full details
The Airbot OpenLager gives the capability of black box recording to any drone that doesn't have it. This is fantastic for tuning and finding issues...
View full details
Most drone pilots have a problem when using the GPS on their drones. GPS modules are slow and get interference. A pilot must wait many minutes for ...
View full details
Get the voltage you need with this Matek BEC, convert 6-60V to either 5V, 9V, or 12V. This BEC defaults to 5V, select either 9V or 12V by soldering...
View full details
This sensor works basically the same way as an optical mouse, helping your iNAV quad to maintain position without GPS! This module also integrates ...
View full details
An unbelievably tiny GPS module, get even the smallest of quads linked up to satellites with this little guy! Check out our GPS selection! Specific...
View full details
The Menace RC ON/OFF switch is capable of switching loads or auxiliary items ON/OFF by connecting to your receiver and controlling from any channel...
View full details
Capacitor NOT included, check out our Capacitor collection here. The FETtec Spike Absorber uses well TVS-Diodes to prevent the connected components...
View full details
Compact GPS Module from HGLRC. The HGLRC M80 PRO GPS Module comes with a QMC5883 chip to help identify the location of your drone quickly. Receives...
View full details
It can be used on traditional PWM receivers or FPV racing flight controller. The tiny buzzer is drived by on board MCU. It can output louder sound ...
View full details
TuneRC Buzzer is an alarm system to help you locate your lost drone. This buzzer has a driver circuit built in, so you can connect it to any flight...
View full details
NewBeeDrone smallest OpenLager F411 gives the capability of black box recording to any drone that doesn't have it. This is fantastic for tuning and...
View full details
SpeedyBee 90° Type-C 5V 3A to 3-6s Balance Plug Action Camera BEC (2 Sets) Check out the Rest of our SpeedyBee product range and PDB/BEC selection ...
View full details
Tiny module with compass and barometer from Flywoo! If your FC board has a barometer, you need to disconnect the Baro SDA / SCL pad. Check out all ...
View full details
Add on AGC microphone module board for Rush Tank Mini VTX. Check out the rest of our Rush FPV selection! Features Ultra small size for easy insta...
View full details
A compact and simple voltage regulator that takes 4-36 volts input and steps the voltage down to 5V and can supply up to 2 amps for any of your 5-...
View full details
The Matek Voltage Spike Filter uses TVS-Diodes to prevent the connected components from huge voltage spikes. The Spike Filter is meant to be used i...
View full details
For those hard-to-reach DJI Air units and Caddx Vista USB-C port connections, this is a great little adapter! Also works with flight controllers th...
View full details
The Matek VB2A5 1S LiPo to 5V Voltage Booster is a compact, high efficiency, synchronous step-up converter for a single cell Li-Ion or LiPo battery...
View full details
The RUSH BLADE Power Filter Board by RUSHFPV was created to help the RUSH BLADES ESCs achieve complete filtering due to its compact structure and h...
View full details
The RUSHFPV Blade Power Filter Board Lite was created to help ESCs achieve complete filtering due to its compact structure and high power. This spi...
View full details
Check out the FETtec OSD Board which gives you on-screen display of important data, as well as full-tuning of KISS parameters. This board is suitab...
View full details
Stop wondering how fast your RC car can run and how high your RC Airplane or helicopter can fly. Now all these data come at your finger with the GP...
View full details
Sold out
Note: The chip of GOKU GM10 V3 GPS is M10050. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA pr...
View full details
Sold out
If you've ever wanted to see your wing's actual relative airspeed rather than ground speed supplied by GPS, this is the thing for you! The kit incl...
View full details
Sold out
Note: The chip of GOKU GM10 V3 GPS is M10050. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA pr...
View full details
Sold out
Digital airspeed sensor from MATEK, a great addition to your Fixed Wing. Check out all our wing flight controllers as well as the entire Matek sele...
View full details
Sold out
Features 72-channel u-blox M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C On-board Ultra low noise 3.3V v...
View full details