Skip to content

GEPRC Taker F405 BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 50A 4in1 ESC)

Original price $57.99 - Original price $57.99
Original price
$57.99 - $57.99
Current price $57.99
Coming Soon
In Stock
Pre Order
Free Delivery on U.S.A. Orders $99 or more

Add To Wishlist

Introducing GEPRC's take on the best budget stack out there on the market!

GEPRC TAKER F405 BLS 50A STACK is a plug-and-play stack system specially designed for DJI Air Unit. With the STM32F405 chip, ICM42688-P gyroscope, 16M black box and GEP-BLS50A-4IN1 ESC, you can enjoy a smooth and effortless user experience. This stack system connects to the DJI Air Unit with no soldering required, plus the upgraded Type-C USB connector increases the lifespan of the socket and reduces the risk of poor contact. The 9V 2.5A + 5V 3A dual independent BEC ensures a reliable power supply for any external device you might need.

Check out all our 30x30 stacks & combos, as well as the rest of our GEPRC selection.


  • Use mainstream STM32F405 chip
  • Equipped with the latest 42688-P gyroscope
  • 16M black box storage
  • Integrated LC filter
  • Upgrade type-C USB interface
  • Directly plugged into the DJI Air Unit
  • With GEP-BLS50A-4IN1 ESC, the flying feel is silky
  • A simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
  • 9V 2.5A + 5V 3A dual independent BEC


GEP-F405-HD V2 Flight Controller

  • MCU: STM32F405
  • IMU: ICM42688-P(SPI)
  • Air Unit Connection: Direct plugging into DJI Air Unit
  • Black Box: 16M onboard
  • USB Connector: Type-C
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BEC: 5V,9V dual BEC
  • Firmware Target: GEPRCF405
  • Size: 36.8×36.8mm, hole 30.5×30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
  • Input Voltage: 3-6S LiPo
  • UART: 6
  • Power Filter: Integrated LC filter
  • Weight: 7.7g


  • Input Voltage: 3-6S Lipo
  • Galvanometer: Support
  • Continuous Current: 50A
  • Burst Current: 55A(5s)
  • Support Protocol: Oneshot125/Oneshot42/Mulishot modes/Dshot 150/300/600
  • Size: 42.9×39.7mm, hole30.5×30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing circle.
  • Weight:13.7g
  • Target: G_H_30


  • 1x Flight Controller
  • 1x ESC
  • 1x Capacitor
  • 1x DJI Air Unit Adapter Cable
  • 1x Flight Controller Adapter Cable
  • 1x XT60 Power cable
  • 4x M3x30 Screws
  • 4x M3x24 Screws
  • 8x Nylon nuts
  • 8x Silicone grommets
  • 2x sh1.0 4pinsilicone cable
  • 1x Camera connection cable