About ready to button up
"About ready to button up the build when lo and behold there is no TPU camera mounts sooo, that part sucks."
Details
Description
This QAV-S 2 Sub-250 Joshua Bardwell SE 3” HD Ready Beginner DIY FPV Drone Kit is designed for Freestyle FPV, featuring a 3" QAV-S 2 frame with a mono plate for the arms and aluminum FPV camera plates. The frame kit is designed to accommodate lightweight performance electronics, such as the Lumenier AIO and XILO 1404 motors. The DIY kit is made from high-quality Lumenier carbon fiber. Compatible with DJI O3 and DJI O4 Air Unit or Walksnail systems (sold separately), the DIY kit comes with all hardware components needed to build the frame and includes a step-by-step guide by FPV expert Joshua Bardwell.
Note:
- Receiver is not included. A receiver that is compatible with your controller is required; please see the options under "Recommended."
- This frame fits only the DJI O4 Air Unit and is not compatible with the DJI O4 Air Unit Pro.
- This is a Full DIY Build Kit with assembly required.
Make sure to check out our other Pre-Built quads and our Lumenier product selection!
Features
- Developed in collaboration with FPV expert Joshua Bardwell
- Mono-plate arms for enhanced rigidity and reduced weight
- DIY Kit includes everything needed to complete your build
- Constructed with high-quality Lumenier components
- Compatible with both O3 and analog camera mounts
- Lightweight design optimized for sub-250g builds
- Durable aluminum FPV camera side plates
- HD Ready DIY Kit
Video
ARM MONO PLATE
The QAV-S 2 Sub-250 Joshua Bardwell Special Edition is truly unique, featuring 3.5mm thick arms paired with an Arm Mono plate. Weighing just 55g (frame only, without accessories), this design strikes an industry-leading balance between lightweight construction and durability, perfect for even the most demanding applications. The Arm Mono plate enhances rigidity while keeping the configuration light.
ALUMINUM CAMERA PLATES
The Lumenier QAV-S2 Sub-250 Joshua Bardwell frame kit features aluminum FPV camera side plates for enhanced protection and flexibility. It supports both HD and analog cameras, including damped mounts optimized for O3 and O4 Air Unit cameras—offering endless possibilities for your setup! These plates are also backward compatible with the QAV-S 2 Bardwell 5" frame kit.
SOFT RUBBER CAMERA ISOLATION MOUNT
The Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE 3" frame kit features a soft rubber camera isolation mount, reducing vibrations for smoother, more stable footage when stabilizing with either on-camera stabilization (RockSteady) or software stabilization (Gyroflow).
Specifications
Propellers: Gemfan Hurricane 3020 3-Blade Propeller (1.5mm Shaft - Set of 4)
Frame: Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE 3” - Frame Kit
AIO: Lumenier LUX HD AIO - G4 FC + 35A AM32 3-6S ESC
Motor: Xilo Stealth 1404 4500kv
Links
Manual
3D Prints
- Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE Arm Guards
- Lumenier QAV-S 2 Joshua Bardwell SE Camera Damping Inserts*
- Lumenier QAV-S and QAV-S 2 (Joshua Bardwell SE and Standard) Antenna Mounts
- DJI O4 PRO 3D Printable Camera Bracket and Mount for QAV-S 2 Sub-250 Bardwell SE Frame Kit**
*The damper inserts should be printed in TPU; you can reduce the walls and infill percentage to help with damping if necessary. Machined aluminum parts will be available soon, and these same damper inserts will work with the production parts if needed.
**This mount is a drop-in replacement for the camera cage on the Bardwell edition of the Lumenier QAV-S 2. The camera cage portion should be printed in something stiff and tough, like nylon or carbon fiber nylon. PAHT-CF is a great choice if you can print it. This mount was also tested in PETG-CF, and it works decently. These are printed parts, though, so remember that durability will suffer compared to machined aluminum parts.
DJI O4 AIR UNIT ADAPTER
Need to adapt your new DJI O4 Air Unit camera to a standard 20mm wide camera plate? We have you covered! We've designed a few different adapter plates that take the small DJI camera and adapt the mounting plates from 14mm to 20mm, using the same hole positions as the previous DJI O3 air unit! Click below to download the 3D file, or follow the link under recommended items to add to your cart.
|
|
Recommended (Not Included)
Includes
- 3x Gemfan Hurricane 3020 3-Blade Propeller (1.5mm Shaft - Set of 4)
- 1x Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE 3” - Frame Kit
- 1x Lumenier LUX HD AIO - G4 FC + 35A AM32 3-6S ESC
- 1x Lumenier Zipper Case - Bardwell Sub250
- 4x Xilo Stealth 1404 4500kv
Compatibility Chart
More Info
- SKU: 22778
- Barcode: 724376363810