• FLYWOO Quad Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
  • FLYWOO Quad Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
  • FLYWOO Quad Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
  • FLYWOO Quad Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
  • FLYWOO Quad Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
  • FLYWOO Quad Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
1 6

Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz

Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz

$287.99
$287.99
In stock
In stock
Add To Wishlist
View full details

Details

Description

The Firefly 1S Nano Baby V2 is a micro-drone with improved flight time, power and design compared to its predecessor.  Power has increased by 30%, with flexible flight, exceptional maneuverability, and higher speeds.  A new canopy for camera protection and a bottom plate for sturdiness are integrated. Additionally, this model includes the GOKU F411 ELRS 1S AIO V2 with ELRS 2.4G receiver (UART 2) for a lightweight design with optimal performance. This version utilizes the elite capabilities of the HDZero HD digital VTX system. The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator. 

Check out our other pre-built quads, as well as other great products from Flywoo!

Features:

  • Redesigned canopy with enhanced aesthetics and reinforced camera protection.
  • The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
  • Equipped with ROBO 1002 23,500KV motor and 1609 4-bladed 40mm propellers, delivers a 30% increase in power, flexible flight, and impressive speeds - perfect for racing competitions.
  • The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. 
  • A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
  • New battery compartment design allows for easy replacement of batteries of different models.

Specifications

  • Motor:  ROBO 1002 23,500KV
  • Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0
  • Props:  1609 - 4 blade 40mm 1.5mm Shaft
  • HD Digital VTX System:  HDZero Whoop Lite Bundle
  • Receiver:  ExpressLRS 2.4GHz
  • Weight:  31g
  • Flight Time:  Explorer 1S 450mAh HV V2: 4m - Explorer 1s 750mAh HV V2: 6m (approximate)
  • Speed:  70km/h (approximate)

GOKU Versatile F411 ELRS 1S 5A AIO V2.0
Flight Controller

  • MCU: STM32F411CEU6 
  • GYRO: ICM42688
  • UARTS: 1/2
  • Soft serial port: 1
  • I2C: SCL/SDA
  • BEC: 5V 
  • Input Voltage: 1S (<4.35v)
  • Firmware: FLYWOOF411_5IN1_AIO 
  • Mounting:  25x25mm, M2

    Onboard 4in1 ESC

    • MCU: EFM8BB21
    • Power supply: 1S LiPo/LiPo HVCurrent: 5A 
    • Firmware: BLHeli_S
    • Factory firmware: O_H_5_REV16_8.HEX
    • Default protocol: DSHOT 150/300/600
    • ELRS 2.4G RX (UART2)
      Flywoo ROBO 1002 23500KV Fpv Motor:
      • Configuration: 9N12P
      • Stator Diameter: 10mm
      • Stator Length: 2mm
      • Shaft Diameter: 1.5mm
      • Motor Dimension(Dia.xLen): Φ13.5x7.75mm
      • Weight(g): 2.5(5cm wire)
      • Idle current(5)@5V(A): 1.5
      • No.of Cells(Lipo): 1S
      • Max Continuous Power(W)3S: 52
      • Internal Resistance: 75mΩ
      • Max Current(3S): 14A
      • Max Efficiency Current: (2-4A)>84%

      HDZero Whoop LITE VTX

        • Input Voltage: 1S-3S
        • Output Power: 23mW, 200mW
        • Operating Frequency: 5.727-5.850GHz
        • Resolution: 1280x720@60fps
        • Power Consumption: 5W @ 25mW, 5.8W @ 200mW
        • MSP Canvas Mode: Yes
        • Antenna Interface: U.FL (IPEX 1)
        • Operating Temperature: 32-104°F
        • Mounting Pattern: 25x25mm, M2
        • Weight: 7g total package

        HDZero Nano LITE Camera

        • Size: 14x16x11mm
        • Weight: 1.5gram
        • Sensor: 0.5 inch, up to 10650 mV/Lux-sec
          Ultra-high sensitive CMOS sensor
        • FOV:
          - 4:3 D:130° H:108° V:84°
          - 16:9 D:122° H:108° V:65°

        Includes 

        • 1x Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
        • 4x 1609 - 4 40mm 1.5mm shaft
        • 2x TPU Battery Mount
        • 1x Hardware Screw Set
        • 4x Prop guards

        More Info

        • SKU: 20772
        • Barcode: 691023532349
         

        Overall rating: 3.0 / 5 from 1 reviews.

        AI Generated Review Summary

        Summary topics

        Review topics: [].

        Review highlights

        Reviews

        Not quite as advertised

        "While the quad I received had all the specified components, they weren't all in their stated places. Rather than an onboard ELRS receiver as expected on the GOKU Versatile F411 ELRS 1S 5A AIO V2.0, the ELRS chip was not populated on the board. Instead a separate ELRS board with the tower antenna is mounted behind the camera. This is disappointing because it also adds weight to the quad and the tower antenna doesn't receive as well as the ELRS receiver on my Mob6 with SuperX HD board and copper wire antenna."

        — Jeremy (3/5)

        Q&A

        What pads are the hdzero vtx soldered to? I had to replace the fc and didn&#x27;t note the connection points.
        Usually Uart2 or 3.