Description

All products containing batteries must be shipped by a ground shipping method.

The ultimate Beginner RTF kit is here! HGLRC Draknight 2" 2S Beginner RTF Kit. This kit comes with everything you need to get up in the air the same day it arrives. It is small but mighty, powered by 2S batteries its ready for both indoor and outdoor use.  The Radio also works with various simulators so you can practice even more!

Check out our other pre-built quads,  as well as our whole HGLRC product line!

Features

• Beginner-Friendly Flight Controller
  
• Powered by 2S LiPo Batteries
  
• Complete FPV Setup
  
• 2" Compact Design
  
• Durable Build

Specifications

REMOTE CONTROLLER

• Common Operations: Frequency Pairing, Power Adjustment, Joystick Calibration
  
• Switch Design: Mix and Match (Three-Stage and Two-Stage)
  
• Model: HGLRC C1 Radio Controller w/ Dongle - ELRS
  
• Third-Party Compatibility: Receivers and Tuners
  
• USB Interfaces: USB-A, USB-C (Dual Interfaces)
  
• Radio Frequency Module: Built-in 500mW
  
• Remote Control Distance: Extended
  
• Wireless Dongle Compatibility: Yes
  
• Operation Procedures: Simplified
  
• Signal Transmission: Stable
  
• Type: Handle Control
  
• Screen: Not Required
  
• Level: Entry-Level
  
• Value: High-Value

DARKNIGHT DRONE

• Built-in image transmission: 0-25-100-400mW (adjustable)
  
• Weight: 44.3g (excluding the weight of the receiver)
  
• Recommended propeller: Gemfan2023 propeller
  
• Flight control firmware: HGLRCF411SX1280_15A
  
• Firmware: BF HGLR-HGLRCF411SX1280_15A
  
• Built-in receiver: UART ExpressLRS 2.4G
  
• Maximum supported paddle: 2 inches
  
• ESC protocol: Dshot150/300/600
  
• ESC firmware: Z-H-30 (Blheli_S)
  
• Master control: STM32F411
  
• Continuous current: 12A
  
• Input voltage: 2-4S Lipo
  
• Peak current: 15A (5s)
  
• BEC output: 5V/1.5A
  
• Wheelbase: 91.8mm
  
• Specter 1003 Motor
  
• Motor: 10000KV (2s)
  
• Size: 104x104mm
  
• Type: 52 inch rack

DONGLE 

• Built-in ELRS Maximum Supported Frequency: 250MHz
  
• External Receiver Support Protocol: CRSF Protocol
  
• ELRS Firmware Upgrade Method: Wifi or USB Plug
  
• ELRS Firmware Name: HGLRC 2.4GHz
  
• Receiving Distance: More Than 200m
  
• ELRS Firmware Version: ELRS 3.0
  
• Size: 74x21x12.5mm
  
• Working Voltage: 5V
  
• Interface: USB-C
  
• Weight: 9.5g

Includes

• 1x HGLRC Draknight 2" 2S Beginner RTF Kit
  • 1x VR100 5.8GHz Analog Transmission Goggles
    
  • 1x 82mm Philips 1.5 Screwdriver
    
  • 1x Darknight Instruction Manual
    
  • 1x 3.5mm Conversion Cable
    
  • 1x M2 Hexagonal L Wrench
    
  • 1x USB-C Charging Cable
    
  • 1x 915MHz FPC Antenna
    
  • 1x C3 Charger Manual
    
  • 1x C1 Remote Control
    
  • 1x 2" Darknight Drone
    
  • 1x Charge Power Cord
    
  • 1x Propeller Extractor
    
  • 1x Wireless Dongle
    
  • 1x Mirco Data Cable
    
  • 2x 720mah Battery
    
  • 1x C3 Charger
    
  • 8x Propellers
    
  • 1x Sticker
    
  • 1x Case
    
  • 1x Card