The Lumenier QAV-PRO Micro Whoop - Cinequads Edition is a versatile 2.5" micro-sized FPV quadcopter that is designed to be small and agile. Featuring full propeller protection with premium carbon fiber, while carrying your HD camera for the ultimate micro FPV cinema experience.
Lumenier has once again teamed up with Cinequads, founded by the world-renowned FPV pilot Phil Freybott! Now bringing you the ultimate micro cinematography whoop. Phil has many years of experience shooting professionally with FPV drones on TV commercial sets, and movies. You can find his work showcased with automotive brands like Porsche and Mercedes.
Combining Cinequads' professional experience and optimized workflow with Lumenier's high-quality design and manufacturing, we are excited to bring you the next professional class of FPV Cine drones... the Lumenier QAV-PRO line.
Designed by Lumenier in collaboration with Cinequads
Supports HD Action Camera Mounting
Great for Professional Cinematic Use
Designed for both Analog and HD
Molded Foam Bumper Protection
Pusher Style Frame
Ultra-lightweight
ADDED PROTECTION WTH MOLDED FOAM BUMPERS The QAV-PRO Micro Whoop gives you the option to fly with only the Carbon Fiber frame, or with added protection provided by the snap-on foam bumpers. Flying close to people or objects that you need a little more security? No problem! Simply pop on the foam pads in seconds and you're good to go. When you're done you can take them back off and fly again with just the carbon guards. So simple!
SUPPORTS GOPRO / HD CAMERA MOUNTING Want to add 4k buttery smooth video recording to your QAV-PRO? No problem! the frame is designed to carry a GoPro style camera with a dedicated camera mount on top. This allows a variety of cameras and 3-D prints to securely hold the HD camera in place making sure you get the perfect shot!
DESIGNED FOR BOTH ANALOG AND HD The QAV-PRO Micro Whoop frame was designed from the ground up to be very versatile and allow many different configurations with the same design. This one airframe design fits 20x20 stacks, 25.5x25.5 toothpick AIO boards, and Caddx Vista digital HD system. This frame has mounting points for an antenna, camera, receiver, transmitter, and more. Now you can fly in full digital HD in an incredibly small package!
PUSHER STYLE FRAME The Lumenier QAV-PRO Micro Whoop airframe design supports a pusher configuration. it was found to have 15-20% more flight time and an even better throttle response. Many "pusher" style frames struggle to easily take off from the ground since their props are often resting on the surface, but with the QAV-PRO Micro Whoop... it's no problem since the entire prop is surrounded by carbon fiber. This gives you plenty of clearance to take off and land without any issue.
ULTRA-LIGHTWEIGHT With an all-up weight of just 53g, this airframe is top in class. It has the perfect balance of durability and protection that you need, without any extra dead weight that you don't. The body is made up of ultra-strong 3K carbon fiber. Combined with custom light-weight quick-swap battery straps and M2 hardware, this kit is the perfect 2.5" setup.
Specifications
Weight: 53g (66g with bumpers and lipo straps)
Dimension: 180mm x 155mm x 53mm
Material: 2mm Quasi-Isortropic Japanese Carbon Fiber (Matte Finish)
"I recently purchased the Lumineer QAV-PRO Micro Whoop 2.5" Cinequads Edition from GetFPV, and I couldn't be happier. The frame is incredibly lightweight and durable, making it perfect for high-speed maneuvers. Paired with the Lumenier ZIP V2 1404 Micro Cinematic Motors, this little quad flies like a dream! But what really sets GetFPV apart is their customer service. They were incredibly helpful and patient in answering my questions. Their friendly and knowledgeable staff made the entire buying experience a breeze. If you're looking for a top-notch cinewhoop frame and exceptional customer service, you should be ordering from GetFPV!"
— Nate (5/5)
Highly recommend getFPV!
"Absolutely love this frame and fast shipping by getFPV is a bonus."
— Tylor C. (5/5)
Impressed but untested
"I am impressed with the carbon quality. The last gen (Freybott) frame had an obnoxious resonance at ~150hz from the fpv cam mount that could only be resolved with a ziptie. I will be looking at that when I finally get this in the air. Its just a backup for now till my Freybott finally gives up the ghost."
— Joshua G. (5/5)
Cool micro whoop
"This is a nice kit and flies really well. Only 217g with analog video and 650mAh battery - flight times of 6 minutes or more just cruising around. A couple small issues, mine did not come with the schematic and getFPV support could not send it to me, but gave me enough tips to figure it out. Comes with some little feet that press fit on the bolt heads but I’m pretty sure they would just fall off. I printed some TPU feet about the same size that the bolts could go through, problem solved. I also designed and printed a small XT30/Vtx antenna/Rx antenna holder that bolts to the back - there is nothing in the kit to help with this."
— Christopher J. (4/5)
Outstanding attention to detail!
"Ab outstanding frame with great attention to detail. Fits a 20x20 stack in the middle, with an O3 unit at the rear, then room at the front (between the camera and stack) for beeper and or gps etc. All of my electronics are mounted to one surface."
— Simon L. (5/5)
great
"great frame design, you can tell it's well thought-out when you use it. Comes with everything you need, mounts zipties, etc. hauling a gopro bones with a tattu 4s 750, it's a great tool for filming indoors and close-ups. FYI: I threw the foam guards away because they make the drone so much more deafening that it's not worth the added safety."
— Christopher B. (5/5)
Good lightweight frame
"Good lightweight frame"
— Nuwan P. (5/5)
Great materials and a robust
"Great materials and a robust design. This frame is my first build. Can't wait to customize this unit."
— Peter R. (5/5)
PU Antenna Moun missing INFO....UHHHHHH
"I just bought a frame in Europe (n-Factory.de), it doesn't say anywhere that I also need a TPU Antenna Mount...UHHHH GRRRR F* there is no where to buy them in Europe, good job thanks"
— Bozidar R. (5/5)
Good quality
"Good quality"
— Vann P. (5/5)
Q&A
Hi, I was wondering if I could fit my DIATONE MAMBA TOKA 1404 3000KV MOTORS on the frame that are 12x12mm mounting as the mothers that are suggested are 9x9mm mounting. thx
Yup 9x9 will work. The motor hole slots are like plus signs.
Hey I wanted to know if you can fit the o3 air unit in the frame?
Yes
Is there any way I can get a step file for the 3d printed gopro mount?
The best way is to buy it from GetFPV
Would I be able to use a set of 1407 motors I have from another build in place of the 1404's recommended? I realize the ones I have are taller but was thinking I could swap these from my Slammed Squirt 4s build. Thanks!
Yes you can, for sure :-)
Hi. I have ordered the kit from here. However, the kit not include the 3dprint of vtx antena + xt30 mount. It seems not only me. Do you have file of that part or somewhere I can order?
Hey Felix, I didn’t receive these prints either. I have however designed my own VTX antenna that I’d be happy to share with you mate. (Matthew Keogh on Facebook (member of loads of FPV groups especially in the U.K.).
Stay Connected
Join our mailing list and stay up to date on the latest and greatest in FPV Drones!
Choosing a selection results in a full page refresh.
