Description

The Lumenier QAV-S 2 JohnnyFPV SE 5" 6S DIY Kit is a drone frame kit designed for cinematic FPV Freestyle flying! This frame has an innovative X-Lock arm retention system. The arms can fold for convenient transportation with just two screws. The frame's aluminum FPV camera protection ensures it will take a bashing before the lens does. With 6mm thick arms, the QAV-S 2 5" frame is ready for flight.

Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The mounting system adds versatility, allowing direct mounting of both the O3/O4 air unit & Walksnail Avatar HD Pro, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance!

Now Includes the O4 Pro Upgrade Kit!

Note: Receiver is not included. A receiver that is compatible with your controller is required. This is a Full DIY Build Kit with assembly required.

*The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame. 

*Safety tips: Please remove all propellers when connecting to the Betaflight configuration software! Betaflight is an open source software, flashing the firmware by yourself may cause the product to work unstable. 

Make sure to check out our other Pre-Built quads and our Lumenier product selection!

Features

• DIY kit contains most components to build your own drone
  
• Made in Collaboration with expert FPV pilot JohnnyFPV
  
• Frame made of High-Quality Lumenier components
  
• Adjustable Aluminum XT60 and Accessory Mount
  
• Backward-compatible mounting patterns
  
• Aluminum FPV Camera Protection
  
• Balanced Durability and Weight
  
• Injection-Molded GoPro Mount
  
• X-Lock Arm Retention

VIDEO: NEW Lumenier QAV-S 2 JohnnyFPV Frame - BELIZE FPV

Specifications

• Stack: Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
  
• Propeller: HQProp Juicy J40 5.1x4x3 Propeller (Set of 4) - Grey
  
• Motor: Lumenier 2307 JohnnyFPV V3 Pro Cinematic Motor
  
• Frame: Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit

Links

Includes

• No FPV System:
  • 1x Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
    
  • 1x Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit
    
  • 2x HQProp Juicy J40 5.1x4x3 Propeller (Set of 4)
    
  • 1x Immortal T Antenna - Regular Length
    
  • 4x Lumenier Johnny V3 2307 1750kv
    
  • 1x Lumenier Zipper Case
    
  • 1x O4 Pro Upgrade Kit
  • 1x Hardware Kit
• Walksnail Avatar:
  • 1x Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
    
  • 1x Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit
    
  • 2x HQProp Juicy J40 5.1x4x3 Propeller (Set of 4)
    
  • 4x Lumenier JohnnyFPV Pro V3 2307 1750kv
    
  • 1x Immortal T Antenna - Regular Length
    
  • 1x Walksnail Avatar HD Pro Kit
    
  • 1x Lumenier Zipper Case
    
  • 1x O4 Pro Upgrade Kit
  • 1x Hardware Kit