RDQ Power Supply v2 - 400W/16.7A/24V -Updated Plug and Play for ISDT Chargers and Others

Name: RDQ Power Supply v2 - 400W/16.7A/24V -Updated Plug and Play for ISDT Chargers and Others
Brand: FPVELITE
SKU: FPVE-PSU-400W-NOF
Price: 59.99 USD
Availability: InStock

$59.99

In stock

Add To Wishlist

View full details

Details

Description

This is a compact, capable, and plug and play power supply which is immediately ready to power your ISDT Chargers. With a 400 watt and 16.7 amp power rating, you are able to make the very most of your charger's capabilities with this power supply. You can easily power your most challenging charging setups, like multiple batteries going full blast on a parallel charging board. No modifications or custom cables are needed with this power supply, which is measures only 230x64x35mm. You can even power multiple chargers at once, since this charger has multiple power output terminals. This power supply comes standard with short protection, overload protection, and overheat protection.

Safety Note: Never leave charging batteries unattended. Always charge batteries inside of a fire proof container which sits on a fire resistant surface.

Check out our other Battery Chargers and Accessories!

Specifications

Max Output Power: 400W
Max Output Amps: 16.7A
Input Voltage: 100-130V
Output Voltage: 24V
Size: 230x64x35mm
2 Output Terminals
Plug and Play for ISDT Chargers and any other chargers accepting 24v input
Short Protection
Overload Protection
Overtemp Protection

Includes

1x RDQ Power Supply - 400W/16.7A/24V - Plug and Play for ISDT Chargers and Others
1x Power Plug and XT60 Power Lead.

More Info

SKU: FPVE-PSU-400W-NOF
Barcode: 6910236003321

Overall rating: 4.4580154 / 5 from 131 reviews.

AI Generated Review Summary

The RDQ Power Supply v2 is a compact and capable power supply, praised for its performance and quietness. It is compatible with ISDT Chargers and offers quick charging speeds. Customers appreciate its professional finish and excellent customer service. However, some users find it noisy and lack power, and there are criticisms regarding the lack of instructions and power switch.

Summary topics

Performance: 35%
Aesthetics: 8%
Charging Speed: 12%
Customer Service: 6%

Review topics: ["finish","shipping","improvement","issues","quality","size","value","works","service","power","wires","looks","charger","battery","warranty","price","support","scratches","setup","buy","fan","unit","psu","switches","board","cable","investment","deal","version","terminations"].

Review highlights

"This power supply is nice and slim and quiet as well." — Robert C.
"This power supply is a great cheaper option." — Gregory T.
"As it’s described it looks good well build works well with my ISDT 30." — Subhash S.

Reviews

Works really great I was

"Works really great I was a little concerned about the hook up of the wires but seems to be working"

— Kenny S. (5/5)

Great power supply

"Gets the job done. Once again, I wish it had an on/off switch. Pictures are for the wiring, since some of you guys had issues with it. I also use it with my solder when im not parallel charging"

— Samuel P. (5/5)

Worth the buy

"Only thing i dislike is I wish the wires were solid mounted to the unit. Other than that it’s been a great little power supply, doesn’t take up much room and packs a punch. The supplied lead for the charger could def be longer"

— Marlen H. (5/5)

Powerful Desk Power Supply.

"Works more than expected, great finish and slim design. however is extremely difficult for portability. Im sure it wasnt designed to do so, however 4/5 stars due to the wired power connection rather than plug."

— Robert A. (4/5)

Can't Go Wrong For a 400 Watt PSU

"I have use the RDQ 400w 24v power supply almost daily for the past two weeks to power my HTRC HT206 400w DUO charger. It is simple to connect one or more chargers and understand how to use. It has worked flawlessly so far and provides more than enough power for what I do with parallel charging boards and lipos from 2-3s 1000-5000mah. Rarely do I come close to using 400w but at no time did the PSU even get warm. I will also use it with an ISDT charger in the near future."

— Peter L. (5/5)

Check wire colors! Works well, but came dented

"Make sure you check the live and neutral wires! Like Aychbe W. Said, they came switched. Use a multimeter to test the connectivity of the plug. The unit came with a small dent in the vent, purely cosmetic damage. The unit works well but I have not tested it at full load. On the side it said don't use it over 80% capacity to extend lifespan. The fan is a tad loud and runs constantly. They could have used a quieter fan. The stock wire that comes with it to connect to XT60 is also fairly short. I soldered an extension on. Also make sure you either install appropriate hardware to connect wires to it, or if you just clamp down on the bare wires with screws, use tape or something for cable strain relief. The connection is physically stronger than I anticipated but a strong pull could yank the wires out like shown. The soldering joint shown in the shrink tube is the length of the original XT60 connector."

— Christian F. (4/5)

Not without issues but there's a 3 year warranty

"RDQ customer support is great. They deserve 5 stars! This power supply works well but without the warranty, I wouldn't recommend it. I'm on my 3rd power supply. First one arrived DOA. 2nd one lasted a little over a year before failing. RDQ honors the warranty and sends one out that arrives in a few days. The plug I received with the most recent power supply had the live and neutral wires swapped, according to what the colors are supposed to be for the US via an internet search for ac wire color coding. Attached are a few pics of how I believe the plug should be wired and the corresponding polarity but be sure to test your plug wires for the correct polarity."

— Aychbe W. (3/5)

Wire terminals on the new V2 are cheap and unsafe.

"There is no reason the screw terminals needed to be changed, removed, or "updated" except penny pinching greed. Without the screws there is no safe way to semi-permanently attach the wires to either end. They advise to not leave these unattended, I see why now. Although I wouldn't want to be anywhere near this thing when it is plugged into an outlet. This was bought to assist college students in their capstone projects, and now I have to find my personal v1 PSU as this one is unsafe."

— JG (3/5)

So far, so good!

"Does what it's meant to. It's pretty noisy, but it allows me to charge my batteries at a much higher rate than if I just plugged into a/c power."

— Uriah M. (5/5)

Sturdy Power supply

"Powerful charger that handles everything you throw at it."

— Paul H. (5/5)

Q&A

The dip switch 1 what does it do? It says soothing? I understand the rest of them.: Send me an email to support@racedayquads.com
Will this work with the ISDT 608?: Yes

RDQ Power Supply v2 - 400W/16.7A/24V -Updated Plug and Play for ISDT Chargers and Others