SpeedyBee F405 WING APP 2-6S Fixed Wing Flight Controller

Description

Check out our other wing flight controllers, and our SpeedyBee products!  

Features

• Wireless configuration 
• Easy installation, plug and play - no soldering needed
• Dual firmware support for INAV and Ardupilot 
• Support Ardupilot's VTOL function 
• F405 all pins break out
• Multilayer board design, stable operation 
• CRSF telemetry data displayed by Lua script 
• 4x LED strip plugs, lighting style 
• On-board current sensor, with 3 BEC outputs
• Includes 90° pin headers, for lower installation height

Specifications

• MCU: STM32F405,168MHz,1MB Flash
• IMU(Gyro&Accelerometer: ICM-42688-P
• Barometer: SPL006-001
• OSD Chip: AT7456E
• Blackbox: MicroSD Card Slot
• UART: 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection))
• I2C: 1x Used for magnetometer, digital airspeed sensor
• ADC: 4x (VBAT, Current, RSSI, Analog AirSpeed)
• PWM: 12x (11+1“LED”pad)
• ELRS/CRSF receiver: Supported,connected to UART1
• SBUS: Built in inverter for SBUS input (UART2-RX)
• LED: 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB
• RSSI: Supported, Named as RS .
• Supported FC Firmware: INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING
• Weight: 8.9g

• Input voltage range: 7~36V (2~6S LiPo)
• Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
• Battery Current Sensor: 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
• TVS Protective diode: Yes
• FC BEC output: Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip
• VTX BEC output: Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.
• Servo BEC output: Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos.
• Weight: 11.4g

• Wireless Configuration (long press BOOT button for 6 seconds to switch modes) BLE mode, connect to Speedybee APP
• Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.
• Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner
• LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes) 4x WS2812 LED strip connectors, adjustable colors and flashing modes
• Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads
• On-board battery level indicator: 4x RGB indicator LED for battery level display by  a number of lights
• Weight: 4.2g

Includes

• 1x SpeedyBee F405 WING APP Fixed Wing Flight Controller

Wiring Diagram